Search results

These just came to my attention, I'll be picking them up. Wanted to share with the community. https://www.dieselgeek.com/collections/vw-shifter-bushings/products/high-performance-vw-shifter-shaft-bushings-for-mk4-golf-jetta-new-beetle...

For all your racing builds with a real transmission https://cae-racing.de/CAE-Ultra-Shifter_89

New offering, now for the FSI http://vag.excelerateperformance.com/iabed-industries/vw/audi-20t-tsi-and-fsi-billet-rear-main-seal-replacement/06a103171a/i-7468588.aspx These is a known failure for the TSI, but no so much for the FSI. Any thoughts on this?

Any thoughts on this? https://www.ecstuning.com/b-grams-performance-and-design-parts/grams-mk5-6-throttle-body-black-series/g09-09-0710~gpd/

Hey all, I'm in the process of building an engine for an EFR 7163 and I've run into a dilemma. There is not a machine shop in my state (NC) that will do the work to align bore and hone mains for a 4 cylinder. So I have two apparent choices. 1. Forgo the billet main caps. or 2. Send the block...

Stumbled upon this: https://www.ecstuning.com/b-assembled-by-ecs-parts/build-your-own-dual-caliper-rear-brake-kit-310x22mm-rotors/br0015kt~dk/?pdk=AQIEAQcGAQEI This isn't my thing, but I know people have been asking about this set-up.

Always a great time, even though I fireballed on the way to it last year. I'll be attending this year, but my car will not be ready yet. I'd love to see some other enthusiasts out there! http://www.wookiesinthewoods.com/

Always a great time, even though I fireballed on the way to it last year. I'll be attending this year, but my car will not be ready yet. I'd love to see some other enthusiasts out there! http://www.wookiesinthewoods.com/

I'm in the process of building a 'race' engine from the ground up to be mated with an EFR 7163. The main goal is consistent performance under extreme stress with minimal points of failure. I feel good about the majority of the build except for two things. 1. Balance Shaft Delete and 2. 1.8t...

Info: http://www.golfmk6.com/forums/showthread.php?t=106366 (inserting links doesn't seem to be working for me) I was thinking that I might stop by and see some racing and hopefully meet some good folks. I've heard good things about this event, but haven't had the chance to go myself. Of...

Hey All, I'll be going again this year to Wookies in the Woods http://www.wookiesinthewoods.com/ with my friends at Apex Tuning. It's truly an amazing driving experience in the tail of the dragon. I figured I'd see if any forum members were going down, so we would say hey and whatnot. So...

I have the BSH pendulum mount (with VWR insert), but I'm looking to upgrade, anyone of thoughts between these two? http://www.goapr.com/products/pendulum_mount.html...

Does anyone know if this will fit with the 6 speed FSI? Seems a way better route than APR if it does. http://www.ecstuning.com/ES308320/

Does anyone have any idea on ETA on the software for the IE manifold for FSI MK5 K04s? Since the MK6 Rs software is already out, I'd figure this would be pretty quick to market. (it seems the IE product thread is no longer active on this forum)

For those waiting on it... http://www.performancebyie.com/integrated-engineering-ie450t-big-turbo-kit-for-mk6-golf-r I'm content with my K04.

I don't expect much feedback here, but I'm in the market for wide Motorsport wheels (10+) with a 5x112 bolt pattern that are fairly light (relatively) with minimal wheel spacer requirements. Do I have any options? Has anyone gone in this direction? Sent from my iPhone using Tapatalk

Updated current / future build and brought to the top... ENGINE BLOCK ** CURRENT • Stock Internals with Aftermarket Gaping Hole ** FUTURE  Calico Coated Rod Bearings  Calico Coated Main Bearings  IE FSI 2.0T VALVE SPRING/RETAINER KIT  IE PERFORMANCE VALVE GUIDE FOR 2.0T FSI ...

http://www.golfmk6.com/forums/showthread.php?t=82013 Just wanted to bring this over here since its going to be released first for the FSI engine.

Hey All, I pulled my rear seats and I'm going to go with this delete: http://www.eurokreations.bigcartel.com/product/mk6-rabbit-gti-r32-rear-seat-delete While I'm at it, I plan on minimizing the road noise that comes from deleting the seats by laying down some of this underneath the delete...

I'm trying to sort out some potential vibration issues with my car. Would the spherical ball bearings add to this or reduce it...