GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

New Q3 Recall for Intake flap motors

Thai-assasin

New member
Location
808 State
I also got a CEL recently. Scanned it and got these codes. So since my version is 0040, i already got the update and flash?
Would I still be able to get this fixed under powertrain warranty?
Should I put my intake back to stock before taking it in?

Address 01: Engine Labels: 06F-907-115-AXX.lbl
Control Module Part Number: 1K0 907 115 B HW: 1K0 907 115 B
Component and/or Version: 2.0l R4/4V TFSI 0040
Software Coding: 0403010A1C070160
Work Shop Code: WSC 21026 444 85705
VCID: 256F3F6F9567
2 Faults Found:

012600 - Intake Manifold Runner Control: Regulation Deviation
P3138 - 008 - Implausible Signal - MIL ON

Freeze Frame:
Fault Status: 11101000
Fault Priority: 0
Fault Frequency: 1
Mileage: 93574 km
Time Indication: 0
Date: 2000.00.00
Time: 14:13:44

Freeze Frame:
RPM: 1218 /min
Load: 41.9 %
Speed: 0.0 km/h
Temperature: 26.0°C
Temperature: 25.0°C
Absolute Pres.: 1000.0 mbar
Voltage: 14.351 V

008200 - Intake Manifold Flap; Bank 1: Electrical Malfunction
P2008 - 001 - Upper Limit Exceeded - MIL ON

Freeze Frame:
Fault Status: 11100001
Fault Priority: 0
Fault Frequency: 1
Mileage: 93574 km
Time Indication: 0
Date: 2000.00.00
Time: 14:13:44

Freeze Frame:
RPM: 1205 /min
Load: 42.3 %
Speed: 0.0 km/h
Temperature: 26.0°C
Temperature: 25.0°C
Absolute Pres.: 1000.0 mbar
Voltage: 14.351 V


Readiness: N/A
 

SKrebs81

New member
Location
Colorado Springs
At first the dealership didn't want to cover it but I kept fighting it and they eventually said they'd call VW to get it covered. Let me leave with the repair and said they'd call me if it wasn't covered. Never got a call back so...
 

SupaMonks

Passed Driver's Ed
Location
Nova Scotia
I had a problem with my intake runner...my CEL came on took it in, and they fixed it real quick. Covered by warrantee so i wasn't too bothered. But this happened last summer. Probably around July.
 

07mkvgti

Rally Car Newbie
Location
Pembroke Pines, Fl
Car(s)
06 GTi
ive thrown a check engine light for this before and they cleared the code. CEL came back last week and went away. i'm assuming it's the same issue. TSB's aren't recalls though.
 

SRTthis

NJ 2 FL
Location
Lakewood Ranch, FL
Car(s)
2010 370Z
so was having cuts lately. got checked out today and was told it was my flapper. is this an official recall or just a tsb. i have 107k on the clock. also it appears this will reflash me back to stock. how much will it cost to get reflashed. revo should have me in their system
 

JetTurbo

geezer
Location
South Florida, USA
Car(s)
2018 GTi Autobahn 6M
so was having cuts lately. got checked out today and was told it was my flapper. is this an official recall or just a tsb.
Not a recall, just a TSB

i have 107k on the clock. also it appears this will reflash me back to stock. how much will it cost to get reflashed. revo should have me in their system
The aftermarket flash should include the update for the flapper motor unless the flash is so old that it was done before the TSB.
If that is the case, get an updated flash from your aftermarket provider, not the dealer.
 
Top