Clutch Replacement

[brosevelt]

I was planning on ordering the Clutchmasters FX200 clutch kit, as I'm at like 70k miles and I'll slip a bit at high boost, low RPM.

I'd be happy to save like 300 bucks though by not getting the SMF that goes with it... Does anyone know if I'd be able to use my OEM Dual Mass Flywheel with the Clutchmasters FX200 (or FX250)?

 

[eurocars]

try calling clutchmasters:

http://clutchmasters.com/index.php?module=site&action=GetPage&id=32

 

[brosevelt]

try calling clutchmasters:

http://clutchmasters.com/index.php?module=site&action=GetPage&id=32

I called and they said it should work, but I'd like some input from other people to confirm that, if possible.

Also, if the clutch is slipping, is there a chance that the flywheel is bad too?

 

[lippyjump]

No. Bolt pattern for pressure plate is different.

 

[brosevelt]

No. Bolt pattern for pressure plate is different.

Yeah the guy must have thought that I was TSI. Talked to ECS and they said I'll have to buy a kit with a flywheel. I'm cool with that. Going to do the 20lb steel one for the least amount of chatter possible.

 

[donjuan1jr]

No. Bolt pattern for pressure plate is different.

It's an oem pp how's that possible

 

[brosevelt]

It's an oem pp how's that possible

The OEM pp is the reason it is slipping in the first place, so that'd be bad news bears if I bought that lol

 

[donjuan1jr]

Its oem plate, no one makes the outside plate, same bolt pattern, same dowel pattern as every other sachs or luk. My CM fx400 is stamped sachs on it. It wont work due to disk design.