9.5 wheel on a 215/40 question.

[GTIIII]

Looking at getting 18x9.5 wheels with a 215/40. Would I need to flare or pull the fenders? Fronts are already rolled. Or should I go with a 205/40? Thanks in advance. And I'm on coils if that helps any.

 

[VMRWheels]

Looking at getting 18x9.5 wheels with a 215/40. Would I need to flare or pull the fenders? Fronts are already rolled. Or should I go with a 205/40? Thanks in advance. And I'm on coils if that helps any.

What offset are you running?

 

[GTIIII]

18x9.5 et 40 all the way around.

 

[Rus.K]

18x9.5 et 40 all the way around.

I would go with the 215 and just throw on some negative camber. The 205 will obviously give you some more room but safety wise I would stick with the 215. Also good luck finding someone to stretch the 205 on the 9.5 thats always a bit more challenging. :thumbsup:

 

[GTIIII]

Thanks Rus! So, would a 215/40 need a flare or fender pull?

 

[Elliott]

No just negative camber

 

[GTIIII]

Like a camber kit or like -3,4, or -5 camber?

 

[Elliott]

3-4 I'm Guessing you will be fine in the rear can't say on the fronts. But if they need doing then you will need camber plates. Depends how low you are.

 

[GTIIII]

I'd want to do -3 in the front and -5 in the rear. Hopefully no rubbing issues will occur.

 

[Elliott]

With those specs you'll be good

 

[GTIIII]

Thanks Elliot! Glad I can count on yall. Keep looking in the threads too see what wheels I get.

 

[Rus.K]

You will need camber plates up front and I believe at most in the rear is 4.8 but I could be wrong. Also be sure to roll the fronts, or if you can find someone to flare them

 

[GTIIII]

I do need a camber kit for the front? And the fronts are rolled.

 

[Rus.K]

I do need a camber kit for the front? And the fronts are rolled.

Yeah to run negative camber up front you need plates

 

[GTIIII]

How much are they? And what are they called?