Frankenstein_VW
Shop Owner / Technician
- Location
- Washington, NJ
Glad you are enjoying the vehicle Nick !
... and thank you for the kind words !
... and thank you for the kind words !
V
Redline Speed Worx Presents "Shop Life"
- Thread starter Frankenstein_VW
- Start date
- Status
tasteofink8733
IlluminatiBilderbergNWO
- Location
- Philly
I'm most likely getting an Ebay DP sometime soon, could you guys build a custom 3" ID catback for me?
Frankenstein_VW
Shop Owner / Technician
- Location
- Washington, NJ
Most Definitely my friend !
joey26lil
Ready to race!
- Location
- mayfield pa
how much do you guys charge for a 3 inch catback with magnaflow muffler for a gti?
Frankenstein_VW
Shop Owner / Technician
- Location
- Washington, NJ
Around $800.00 Depending on the Tips you would like and what type of flanges ( v band / 3 Bolt )
Frankenstein_VW
Shop Owner / Technician
- Location
- Washington, NJ
Our New Toy !
FSI A3 Engine Build
AMG Big Brake Kit
Looks like its time to Rebuild the FSI Cylinder Head, A good bit of cleaning was required to remove all the carbon deposits !
V band installations all around !
FSI A3 Engine Build
AMG Big Brake Kit
Looks like its time to Rebuild the FSI Cylinder Head, A good bit of cleaning was required to remove all the carbon deposits !
V band installations all around !
Gotsol
Ready to race!
- Location
- Wilmington, NC
more details on that brake kit please!
Frankenstein_VW
Shop Owner / Technician
- Location
- Washington, NJ
The calipers we installed were on a Mercedes C230. the calipers are from a C32 Mercedes
Gotsol
Ready to race!
- Location
- Wilmington, NC
and they bolt right up to the hubs on a MKV?
Frankenstein_VW
Shop Owner / Technician
- Location
- Washington, NJ
No not at all. We installed them on a C230
Gotsol
Ready to race!
- Location
- Wilmington, NC
Oh I see, I thought you were putting them on that A3
Frankenstein_VW
Shop Owner / Technician
- Location
- Washington, NJ
Sorry for the confusion ! It would require some serious Adapters and custom rotors to fit the C32 AMG Calipers on a VW / Audi
Frankenstein_VW
Shop Owner / Technician
- Location
- Washington, NJ
FSI CARBON BUILD UP from a vehicle with under 60k and Upgraded Turbo System, this cylinder head showed "Mild" Build up compared to other vehicles we have serviced
Un-Cleaned Valves Removed from Cylinder Head
Sea Foam Cleaning on Two Valves while they were still in the Cylinder Head VS. Un-cleaned
These Two Valves were Sea Foamed while still in the head, as you can see its still difficult to clean the back sides
Sea Foam Clean Ports while head was still fully assembled VS. Un Cleaned Ports
As you can see from the pictures a Sea Foam Treatment Service to clean the cylinder head / valves only works to an extent ! Cylinder head is currently being steam cleaned, all the valves will be fully cleaned and re installed with new Valve Guide Seals.
Un-Cleaned Valves Removed from Cylinder Head
Sea Foam Cleaning on Two Valves while they were still in the Cylinder Head VS. Un-cleaned
These Two Valves were Sea Foamed while still in the head, as you can see its still difficult to clean the back sides
Sea Foam Clean Ports while head was still fully assembled VS. Un Cleaned Ports
As you can see from the pictures a Sea Foam Treatment Service to clean the cylinder head / valves only works to an extent ! Cylinder head is currently being steam cleaned, all the valves will be fully cleaned and re installed with new Valve Guide Seals.
Frankenstein_VW
Shop Owner / Technician
- Location
- Washington, NJ
Battery Successfully relocated to the trunk in our Mark 5 ! 
- Status