Pressure too High - Turbo

[nakti]

Hi,
Anyone know what the error code means?
Scanned via Vagcom.
I have Re-mapped car and no errors when scanning.
I drove like 30 minutes and after I scanned again and got this error message. (Can it be something with the N75 valve? )

I don't get this when I have the stock map.

1 Fault Found:
000714 - Turbo / Supercharger B
P02CA - 000 - Pressure too High

 

[Duster117]

Is your car stock?

 

[nakti]

The car is stock

 

[Spectre]

Could this be a wastegate problem? Or the N75 valve on the wastegate?

 

[nakti]

Could this be a wastegate problem? Or the N75 valve on the wastegate?

I have ordered N75 Valve, waiting for this and will see if it helps.

 

[Spectre]

I have ordered N75 Valve, waiting for this and will see if it helps.

OK. That's where I'd start too. Have fun puttin' that bitch on. :wink:
Might as well put silicone vac lines on when you do it. ECS sells it at a pretty good price. Just a thought.

 

[nakti]

OK. That's where I'd start too. Have fun puttin' that bitch on. :wink:
Might as well put silicone vac lines on when you do it. ECS sells it at a pretty good price. Just a thought.

Thanks mate,
How do I know which silicone vad lines in MM I need ?

 

[Spectre]

I think maybe 4mm but email Chris V at ECS to be sure. Anything I'm in doubt of I ask him. They sell Forge from 3-6mm. Or maybe someone here would know for sure. Anyone?

 

[eurocars]

4mm

 

[Tutti57]

Yeah that thing sucks to get to.

Sent from my SPH-M950 using Tapatalk

 

[Spectre]

It was right there when I did the timing belt.

 

[nakti]

Thank you, I have now got my N75 but problem was for me to connect it because The original vac lines didn't get out.
One of the vac line did get out when I tried to disconnect it with the clamps on. but not two of them, I wonder if I can re-use the silver clamps on the vac lines or should I buy new clamps for 4mm vac lines ?

Can I use cable Ties or is it better with clamps ?

 

[nakti]

How come. The car worked fine after fixing the N249 and N75 and now the turbo doesn't kick in :/
No leaks what more can I check ?

 

[nakti]

What can be the issue if the turbo doesn't kick in ? Can't feel the pressure.
How can I check the wastegate if it can be the problem ?

 

[nakti]

I did unplug the Vacuum to wastegate and tried the boost but can't feel anything when I drive. Its same When connected properly to the New N75.