GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

In process: Alibaba GTI build

Jachas

Ready to race!
Location
PL
Car(s)
A3 8V
https://ecotune-scotland.co.uk/ecotune-ea888-3-4-port-race-head-and-turbo-kit/

this would be sick.. 12k USD race head and turbo set-up.
but you will need an upgraded trans :(
This head is from China market EA888.3 engine, which, apart from head without integrated exhaust manifold turbo had pneumatic wastegate, no MPI (so like NAR spec engines) and regular, non-electronic thermostat housing (AFAIK 1.8TFSI from NMS Passat had same too?)

China spec 1.8TFSI had CUFA engine code
 
Last edited:

golfRdaddy

Ready to race!
Location
Bakersfield
Car(s)
17R / 16R
The Ecotune kit only currently fits right hand drive. I wonder if anyone makes a similar turbo kit for US .. for the 4 port head?
 

Jachas

Ready to race!
Location
PL
Car(s)
A3 8V
This head is from China market EA888.3 engine, which, apart from head without integrated exhaust manifold turbo had pneumatic wastegate, no MPI (so like NAR spec engines) and regular, non-electronic thermostat housing (AFAIK 1.8TFSI from NMS Passat had same too?)

China spec 1.8TFSI had CUFA engine code

I found part number of CUF head for interested:

06L103064E
 

Bombzix

New member
Location
Inverness Florida USA
Car(s)
MK7 GTi
Would this work as a CXCA substitute?

About to buy one myself once I know what engine code is compatible.

I was told by them that the CJX would work no problem .

I have a 2015 GTi and the CJX I thought was golf R?
 

Attachments

  • IMG_1151.png
    IMG_1151.png
    1.6 MB · Views: 37

scrllock

Autocross Champion
Location
MI
Would this work as a CXCA substitute?

About to buy one myself once I know what engine code is compatible.

I was told by them that the CJX would work no problem .

I have a 2015 GTi and the CJX I thought was golf R?
ask them for compression ratio and which cams are installed
 
Top