Tools Needed:
Part MNXZ14 - 14 mm 12 Point Driver (Metalnerd site)
Part MN3424 - Strut Spreader Bit (Metalnerd site)
3/8" Socket Wrench
1/2" Socket Wrench
1/2" Impact gun (or breaker bar, but the gun is so much quicker)
10mm 6pt socket
13mm 6 pt socket
16mm 6 pt socket
16mm 6 pt extended socket
17mm 6 pt socket
18mm 6 pt socket
18mm 6 pt extended socket
21mm 6 pt socket
22mm 6 pt socket
27mm 6 pt socket (for axle bolt)
Assorted open ended wrenches
Torque Wrench
Strut Spring Compressor (you can get this on loan from auto stores such as Advanced Auto Parts etc...)
(Thanks to SpeeDemon on MFG for the above info)
Be sure to replace the 27mm axle bolts, and the 14mm triple square strut bolt and nut.
www.ecstuning.com sells a kit with these in it. Be sure to torque everything to spec as well. Be very patient, and have fun. Let me know how it goes.
I just did mine last weekend, so if you have any questions, just let me know.