Cbus mkv
Lowcally Famous
- Location
- Dayton, Ohio
just did it, great thread!
Mine were not the same. In my case, the new ones were much shorter than the stock ones which optimizes the leverage for the struts.I didn't need the new balls for the dampers. Why do people change them? My old ones were identical to the new ones apart from the color
VCDS 10.6.3 should also work. 10.6 would show the following picture in my early-2004 Mk5 case.VCDS 908 also works for the coding
Pretty sure that is wrong. You can use any valid version of VAG-COM that connects to your car to change the setting..... First.. The VAG-Com work. YOU CAN NOT USE THE LATEST UPDATE, so if you have updated your vag-com to VCDS 8.50, you will need need to re-install the older version 704.1 which can be found here: http://isohunt.com/torrent_details/26816746/vag+com?tab=summary...
DO NOT INSTALL THE VERSION IN THIS LINK IF YOU HAVE A LEGIT VAGCOM WITH A LATER VCDS VERSION.
IT WILL BRICK YOUR CABLE.
I replaced all 4 strut pins when I did mine Used lithium grease but still not perfect Works best when the sun is up:biggrin:Installing mine this week.
I replaced all 4 strut pins when I did mine Used lithium grease but still not perfect Works best when the sun is up:biggrin: