Rear brake pad fitament issue

[Carlosfandang0]

Why not just get the part number of the caliper... Some pictures of the og brake pads compaired to the non PP oe pads would help too.

Probably not very easy to see it, the obvious thing to do would be to match the old pads to the new set (shape, size, appearance etc), would have been solved long ago!

 

[LB_724]

Probably not very easy to see it, the obvious thing to do would be to match the old pads to the new set (shape, size, appearance etc), would have been solved long ago!

that is why they have another call in to Hawk. They sent measurements and photos to Hawk.

these are the best pics I could get this morning. I have been searching this morning using the numbers from the pad in the pics.

 

[Carlosfandang0]

I believe this is the part number for your current pads. 5Q0698451B

and this appears to be the revised number
7N0698451A

 

[LB_724]

I believe this is the part number for your current pads. 5Q0698451B

and this appears to be the revised number
7N0698451A

thanks. I’ll check today and see if that is what they were going by. The numbers on the current rear pads weren’t pulling up much on search.

 

[russiankid]

So what exactly is the fitment issue? Is it the size or the mounting ears? Those look like standard non PP calipers to me.

 

[Carlosfandang0]

So what exactly is the fitment issue? Is it the size or the mounting ears? Those look like standard non PP calipers to me.

They are standard non PP calipers.

 

[Carlosfandang0]

thanks. I’ll check today and see if that is what they were going by. The numbers on the current rear pads weren’t pulling up much on search.

The part numbers I posted are correct for your calipers.