BSH help...is this a manifold block off plug/cap?

[zap]

Hi

Anyone can help identify this piece? I'd emailed tech at BSH but no reply. The end seems to the actual plug, I tried to separate that from the top piece (seems to be boost tap??) but couldn't. Can it be separated? I need to separate it as the whole piece is not a tight fit and it dropped before (thank god I found it on the floor board).



Uploaded with ImageShack.us

 

[BSH Speedshop]

The part is the cap from our PCV kits. I am not sure what the other part is but they are two separate pieces.

 

[stringshifter6]

If it won't come apart, try prying them apart with a screwdriver or similar tool. Something plastic would be best but if you don't have that, wrap the screwdriver tip with some tape so it doesn't mar the metal cap.

 

[IIIHobbs]

Remove hex set screws first, then remove.

 

[Viking445]

The piece on the left looks like Forge's boost tap. But it looks like its missing the clip that goes in that groove that prevents the tap from getting blown off.

 

[zap]

Tks guys, guess mystery solved, the top part from Forge and the bottom part from BSH. All screws are removed prior to attempting to separate both pieces. I tried twisting them, even with clamps but couldn't. Any other ideas? I hope the installer didn't super glued them together.

 

[BSH Speedshop]

You removed the silver set screws first right?

 

[zap]

You removed the silver set screws first right?

Yes, sorry edited my previous post.