Brake Pressure Sensor1 (G201)

[nakti]

The car's ESP light is on all the time and can not turn off.
and I ran the test with Vagcom and got message:
ESP Front MK60
01435 Brake Pressure Sensor1 (G201)
012 - Electrical Fault in Circuit

What could this be and how do you know which tire has failed?
Got reply from VAG that it might be ABS unit Actuator which is wrong?

How can I do a Measuring test for every tire to see which sensor has been failed with vagcom?

 

[The Fed]

The car's ESP light is on all the time and can not turn off.
and I ran the test with Vagcom and got message:
ESP Front MK60
01435 Brake Pressure Sensor1 (G201)
012 - Electrical Fault in Circuit

What could this be and how do you know which tire has failed?
Got reply from VAG that it might be ABS unit Actuator which is wrong?

How can I do a Measuring test for every tire to see which sensor has been failed with vagcom?

-------------------------------------------------------------------------------------------

Might be the ABS unit, but more likely it's the brake light switch.

http://wiki.ross-tech.com/wiki/index.php/01435

01435 - Brake Pressure Sensor 1 (G201): Electrical Fault in Circuit
Possible Causes

Brake Pedal Switch (F) faulty/jammed
Brake Pressure Sensor 1 (G201) faulty

Possible Solutions

Check/Replace Brake Pedal Switch (F)
See Measuring Blocks
Check/Replace Brake Pressure Sensor 1 (G201)
ABS Hydraulic Unit (N55) may need to replaced
Perform Brake Pump Bleeding
Perform Brake Pressure Sensor 1 (G201) Basic Setting
Replace Brake Electronics Control Module (J104)

Special Notes

When found in MK60 ABS/ESP Brake Systems:
Check if the Repair Kit documented in TPI 2024465 or 2025290 with the Part Number 1K0-698-517-B is compatible, using the Repair Kit allows to replace the Hydraulic Unit (N55) and the Brake Pressure Sensor 1 (G201) separate from the Control Module which will reduce the Repair Costs.

 

[trialerror00]

^ good to know

Sent from my Kindle Fire using Tapatalk 2

 

[nakti]

Nice thanks.
But:
The Ross-Tech says: Check field 1, the value has to be between -8.0 and +8.0 bar.
And vagcom shows: Brake Pressure: 213-214.15 bar