FRONT TORQUE
Suspension strut mount to damper
Use new nut
60 Nm = 44.25 lb-ft
N-910-216-01 x 2
Suspension strut to wheel bearing housing
Use new nut
70 Nm + quarter turn (90°) = 51.63 lb-ft + 90°
N-101-064-02 x 2
Suspension strut to body (suspension strut tower)
Use new bolts
15 Nm + quarter turn (90°) = 11.06 lb-ft + 90°
N-101-277-07 x 6
Ball joint to control arm
Use new nut
60 Nm = 44.25 lb-ft
N-103-320-02 x 6 -???
Connecting link to suspension strut
Use new nut
Counter hold at joint pin inner multi-point fitting
65 Nm = 47.94 lb-ft
N-015-081-6 x 2
Drive axle to wheel hub “hex head bolt”
Use new bolt
200 Nm + one half turn (180°) = 147.51 lb-ft + 180°
N-910-406-01 x 2
Drive axle to wheel hub “12-point bolt”
Use new bolt
70 Nm + quarter turn (90°) = 51.63 lb-ft + 90°
N-101-064-02 x 2
REAR TORQUE
Lower control arm 2 wheel bearing housing
Use new nut
90 Nm + quarter turn (90°)
N-106-286-01 x 2
N-101-064-02 x 2
Rear upper strut mount: 37 ft/lb + 45degree turn
Shock lower mounting bolt: 133 ft/lb
Wheel LUG BOLTS
88~89 ft/lb
thank you