Feeler Trade: 18x9 18x10 Gold CCW Classic (reverse mounted)

[f_399]

Took it off the car for the end of the show season.
18x9 et32 on 215 40
18x10 et32 on 225 40

Falken 512

Brushed gold faces
Gold Bolts
Polished lips
Black barrels

Comes with brushed gold center caps and hub rings if you dont want to run caps

No center cap

Fitment (w/ 8mm spacers in front)- as you can see, i don't run a lot of negative camber even aired out. It will tuck all around if need be.

Less that 10k miles on wheels and tires. I don't run a lot of negative camber in the back and i drive it high so its even wear all around.
Curb rash on the rear passenger side. Can be sanded down then polished, if not, replacement lip is $150-$175

Looking for trades, let me know what you got.

 

[f_399]

Correction, it may not tuck in the rear.

I have never tried to max out negative camber in the rear. Should be close, may just sit completely flush to the fender.

 

[thebigbang]

good luck Aj, these are so sick.

 

[Erik228]

Sad to see these go, but good luck with a trade!
Here's how high you ride lol

 

[CwGti09]

With a slight pull it should tuck. I ran 10.5 et 32 with max camber until inner barrel was barely on shock. Sat fender to lip. With a 10 you should have the extra clearance inside to tuck.

 

[f_399]

lol thanks! worry free driving!

car was aligned at that height so i keep it that way, saves tires!

 

[cdwalls]

THOSE ARE INSANE

 

[sandro_bit]

Trade for 19x8/5 Braelin Alloy BR03 Concave?

http://www.golfmkv.com/forums/showthread.php?t=172271