bazzle
Go Kart Champion
- Location
- Melbourne, Australia
- Car(s)
- MY08 R32 Silver 3dr
Just fitted the left one under the passenger seat of my Ozzie R32.
Thanks for the pix, helped to make the fit easier.
You dont need to remove the 3 clips to remove drawer, just lift the centre flap and pull.
I used the 2 rivets but you can use 2 self tapping screws if you wish.
The spring clip on the bracket can take a self tapper too. ( I found one that fitted)
Actually you can use self tappers for all the screws instead of the small thread cutting torx that come with the drawers, a lot easier if you dont have the tools.
Hardness factor: 2/10
Bazzle
Thanks for the pix, helped to make the fit easier.
You dont need to remove the 3 clips to remove drawer, just lift the centre flap and pull.
I used the 2 rivets but you can use 2 self tapping screws if you wish.
The spring clip on the bracket can take a self tapper too. ( I found one that fitted)
Actually you can use self tappers for all the screws instead of the small thread cutting torx that come with the drawers, a lot easier if you dont have the tools.
Hardness factor: 2/10
Bazzle
Last edited: