Compiled list of DIYs so far.....

Check your connection is sitting right. If they are led bulbs, as they are aftermarket perhaps you need to flip the bulb? :Iono:Just s thought.

I didn't see a DIY for fixing the PVC issue that the FSI commonly has.

VW rabbit brake rotor replacement

Hello,
I have something that might help anyone out with replacing there rotors and dealing with the joys of German engineering.
First, stripping your security bolt, these bolts seem to be designed to strip very easily for your convenience. I took the rest off and welded the key on and thankfully it came off.
The 14 mm 12 point brake caliper mounting bracket bolts! Why can I not find this information anywhere? Why do I find only 12 mm 12 points? What is a 12 point?

I had to cut off most of the bit to fit the socket and the wrench in between the upper control arm and the back of the heat shield of the brake. Every time I broke loose the brake caliper mounting bracket 12 point 14 mm bolts I thought I just broke the tork wrench.
Good Luck

Few of my DIY for the 2.5
MAF Cleaning
https://youtu.be/nL4ol37q2Yo
Fuel Filter
https://youtu.be/wfK2OBeZK80
Cabin Air Filter
https://youtu.be/KXHL48X7kmg
Engine Air Filter
https://youtu.be/MAANRJvA9qQ
Spark Plugs
https://youtu.be/S3Gb6mM15SM
Rotors and Pads
https://youtu.be/o41f3yUrNlk
https://youtu.be/WHlgWe_G_hA
https://youtu.be/AvhufC_ctGo
Water pump
https://youtu.be/bVYAy8lBAog
https://youtu.be/qgjM7bUKaS0


Sent from my VS995 using Tapatalk