GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Redline Speed Worx Presents "Shop Life"

Status
Not open for further replies.

Frankenstein_VW

Shop Owner / Technician
Location
Washington, NJ
We finally finished our ultimate catch can! No more smell, No more blow by from the vent in a VTA application.

Although it required battery relocation.. We also Powder coated everything Granny smith Metallic Green.

 

BillyBob

is afraid of the dyno...
Location
New Jersey
Car(s)
'12 4 door GTI
Nice!
I may have to get you to powdercoat my rims this spring. You up for that?
One or two need some rash cure. LMK if it's doable.
 

Frankenstein_VW

Shop Owner / Technician
Location
Washington, NJ
It should do the job quite well !

We will be closed this Thursday - Monday, as we are going down to APR's HQ in Alabama for thier Yearly Distributor Conference! Get to find out about all the new nasty products they will be bringing to the market! We will be available through e-mail while we are out of town!
 

Frankenstein_VW

Shop Owner / Technician
Location
Washington, NJ
We are pleased to announce for all you K04 S3 Edition 30 Equipped equipped guys that we will be offering the ability to switch from your current ( non-APR ) Software Over to APR's Performance Tune for only $899.00 ! In addition our pricing is for a Fully Loaded ECU Package !

APR's engineers have expertly recalibrated the engine management system to allow for nearly flat torque delivery from 2500 rpm's to 5000 rpm's which results in a smooth linear pull throughout the power band. Keeping the track enthusiast in mind, this conversion package will not result in overpowering of the driveline but will allow for smooth acceleration to easily maintain control while cornering.
ED30/S3 K04 Kit

The Borg Warner K04 turbocharger selected by VAG engineers is perfectly sized for the 2.0 liters of displacement to allow for stout horsepower numbers as the rpm's increase with no fall off as redline approaches. This ensures plenty of power in the high rpm's for continued acceleration in the straights or for shifting back into the healthiest portion of the power band at the drag strip.

Featuring APR's Patented EMCS program switching functionality and DirectPort Programming, APR's Engine Management Calibration for this conversion package allows for a range of Octane and situation specific calibrations to be installed simultaneously on your vehicle's ECU.

* Stock Mode = OEM ECU Settings
* 91 Octane Performance = 320hp and 320lb-ft
* 93 Octane Performance = 323hp and 335lb-ft
* 100 Octane Performance = 355hp and 368lb-ft
* Valet Mode = Limits rpm to 4500 and MPH to 70



Cheers !
 

Frankenstein_VW

Shop Owner / Technician
Location
Washington, NJ
MMMM so fresh and so clean








Valves all lapped to the fresh cylinder head







A few more ready for rebuilds !



ugh oh !



S/C Pulley bearings go boom on the E55's... luckily we are one of the only people who has a supplier for the bearings other than the $1000 rebuilt pulleys from the dealer.





Largest Crank Pulley available for the E55 !




Long Tubes for another Customer's E55 that we had ceramic coated ! He will be back in the shop in the next week or so as we are building a full 3" exhaust system with X pipe v-banded to his long tubes !






Now we don't just work on fancy whips, gotta give the VW Bus some love ! Can't beat the camper top !




:laugh:

I have a ton of pics from the trip down to APR, just finishing them up to upload !
 
Status
Not open for further replies.
Top