I would suggest going to this shit workshop and spend one or two full days with them doing the full inspection and checks for all parts you asked them to install and to check and test all mechanical parts.
Also, to evaluate the tuning they did and keep doing fine tuning with them while you are there.
It’s serious my friend, you spent TOO much money and I wouldn’t accept such shit after all that money and time spent.
How do you like your reacaros? I’ve been looking into picking up a set of pole positions
My first impression of the Brembo brake system is that it almost went unnoticed. That was a good thing. I noticed no difference in pedal travel vs stock. They do of course have a lot more stopping power than stock but very easy to modulate with the street pads in (HPS 5.0 f/r)
I am very happy with the setup and can hardly wait to drop the GLOC pads in and see what happens at the track.
Going with the RS3 master cylinder was the right choice. I had read many posts about increased pedal travel using stock master cylinder.
Brembo 18z front and rear with Wilwood parking caliper.
Fabless rear mounting kit - no longer available unfortunately
Glad that the car seems to be driving well now. How is low end torque under 3,000 RPM compared to a K04?
Will you go with wider tires?
How do you like your reacaros? I’ve been looking into picking up a set of pole positions
My first impression of the Brembo brake system is that it almost went unnoticed. That was a good thing. I noticed no difference in pedal travel vs stock. They do of course have a lot more stopping power than stock but very easy to modulate with the street pads in (HPS 5.0 f/r)
I am very happy with the setup and can hardly wait to drop the GLOC pads in and see what happens at the track.
Going with the RS3 master cylinder was the right choice. I had read many posts about increased pedal travel using stock master cylinder.
Brembo 18z front and rear with Wilwood parking caliper.
Fabless rear mounting kit - no longer available unfortunately
Oh so we are using the same brake set up - I’m using that on my mk6. I keep adjusting my parking brake to make it less squeaky [emoji849] also counter sunk the bolts and painted the calipers themselves red to match oem. And painted the brackets since they came bare metal.
Sent from my iPhone using Tapatalk