My PTE5858 - VW GTI Forum / VW Rabbit Forum / VW R32 Forum / VW Golf Forum

high_octane3541 · 02-20-2014, 12:38 PM

I'm new to this forum but thought I would share what I've been working on. Will post more pic/ specs of my build once I get off work.

- James

*eurocars* · 02-20-2014, 12:41 PM

cool, welcome

freshpots · 02-20-2014, 01:33 PM

Which valve cover is that? Holy intake

U-20T · 02-20-2014, 02:03 PM

subscribed for impressions looks good

Tutti57 · 02-20-2014, 02:23 PM

Welcome. What do you have there fella?

Fernas · 02-20-2014, 03:38 PM

Kind of like this, but with less chrome. Interested.

http://forums.vwvortex.com/showthrea...t-Valve-Covers

ErBall · 02-20-2014, 04:50 PM

Looking good. Got any dyno numbers?

Just saying, an HEP manifold would look awesome in there.

high_octane3541 · 02-20-2014, 05:29 PM

Long story short I use to have a k04...then went apr stg3. Then ditched the apr software and jumped over to eurodyne.

I had Forced Performance modify the 2871r by putting their billet compressor wheel in and made 420whp @30psi with w/m. Lowered the boost to 26-27psi for daily driving so it was sitting around 400whp.

Got bored with the power and I was pretty much maxed out for the efficiency of the turbo so I started putting another setup together.

Current setup:

- IE rifle drilled rods
- JE pistons 9.5:1 CR
- JE wristpins
- ARP head studs
- calico coated rod bearings
- PTE5858
- FFE tubular mani
- Custom downpipe
- 4" intake
- Tial WG
- Tial BOV
- Bsh motor/ trans mount/ Dogbone
- HPA lower subframe mount
- 034 upper subframe mount
- IE valve cover and catch can
- Fluidampr
- APR Intercooler
- APR RFD
- RS4 injectors and rail valve
- Eurodyne Maestro and Boost manager with w/m
- USP lpfp
- ceramic/ powder coating of all necessary parts

Car will be going back to my tuner (Dubsquared) on March 3rd to dyno tune the new setup

Still need to install this

Shoutout to my friend JC for all the fab work.

ChattMkv · 02-20-2014, 05:35 PM

Quote:

Originally Posted by high_octane3541

high_octane3541 · 02-20-2014, 05:36 PM

Quote:

Originally Posted by Fernas

Kind of like this, but with less chrome. Interested.

http://forums.vwvortex.com/showthrea...t-Valve-Covers

Yeah it's the IE valve cover and I had it ceramic coated a satin silver

ViRtUaLheretic · 02-20-2014, 05:47 PM

Nice setup man, looks good and can't wait to see the dyno #s of your new setup.

How do you like the Boost Manager Plus?
Eventually I would like to make the switch to Eurodyne and take advantage of BM+ for my direct port injection setup

flat tire · 02-20-2014, 06:00 PM

Great build from a Texan.

high_octane3541 · 02-20-2014, 06:13 PM

Quote:

Originally Posted by ViRtUaLheretic

Nice setup man, looks good and can't wait to see the dyno #s of your new setup.

How do you like the Boost Manager Plus?
Eventually I would like to make the switch to Eurodyne and take advantage of BM+ for my direct port injection setup

Thanks dude.

I like it a lot and it made the initial tuning a lot easier since all parts were supplied by eurodyne. I didn't want to run into any issues with software/ hardware not being compatible and being told that "oh, your issue is with the software. Our hardware is fine" or vise versa.

high_octane3541 · 02-20-2014, 06:14 PM

Quote:

Originally Posted by flat tire

Great build from a Texan.

Born and raised

GIACUser · 02-20-2014, 07:57 PM

Yee Hah - damn that all looks very nice - I hope you post a good GoPro video when you are done so we can all go for a virtual ride in that beast.

Red5pade · 02-20-2014, 08:02 PM

post some videos please. looks awesome. whats the final goal?

high_octane3541 · 02-20-2014, 09:05 PM

Quote:

Originally Posted by Red5pade

post some videos please. looks awesome. whats the final goal?

I'd be happy with 500

613B6 · 02-20-2014, 09:06 PM

Badass man! Fab works looks amazing. Boost manager and eurodyne ftw.

Tutti57 · 02-20-2014, 09:32 PM

Looks so nice. All of those pieces look top notch. I'm very attracted to it. Anyone else feelin funny in the pants?

vegasGTI · 02-21-2014, 01:11 AM

Quote:

Originally Posted by Tutti57

Looks so nice. All of those pieces look top notch. I'm very attracted to it. Anyone else feelin funny in the pants?

Libala Timmah Pants!

NJdubber · 02-21-2014, 11:34 AM

Nice car and nice build, that FFE manifold is just sexy!

high_octane3541 · 02-21-2014, 02:19 PM

Thanks guys.

Few other mods that I've done:

- hotchkis f/r swaybars
- whiteline control arm bushings
- Adams Rotors: slot and dimple
- stoptech pads

Got rid of my B&Gs and just installed the pss10 3 weeks ago

I'm sure I'm forgetting other things that I've done. I'll post em up if I remember

Oh, don't think i mentioned it earlier but the car is DSG

02-20-2014, 12:38 PM	#1
high_octane3541 Formula 5000 Driver Drives: 08 MkV GTI / 2016 S3 Join Date: Feb 2014 Location: McKinney, TX Posts: 1,789	My PTE5858 I'm new to this forum but thought I would share what I've been working on. Will post more pic/ specs of my build once I get off work. - James __________________ B00ST!!! IG: high_octane3541

02-20-2014, 12:41 PM	#2
eurocars 5/17/15 - Never forget Drives: GTI Join Date: Jan 2009 Location: Indianapolis Posts: 15,062 *View eurocars's Garage*	cool, welcome __________________ My big turbo and shaved bay build thread: http://www.golfmkv.com/forums/showthread.php?t=151460

02-20-2014, 02:03 PM	#4
U-20T Oval Champion Drives: 08.5 BT Daily, MK6 BT AWD GTI Join Date: Apr 2012 Location: Carmel, NY Posts: 150	subscribed for impressions looks good __________________ Uber MK6 GTI - Build Thread Part 2 - Big Turbo DSG AWD Swap - #GTI4motion My Big Turbo Build Thread, part 1 - 575whp - Unitronic Tuned Old Setup Dyno Video Buy the best setup on MK6, Period - Parts Link, Big turbo kit/Built trans etc.

02-20-2014, 02:23 PM	#5
Tutti57 FIA GT Newbie Drives: 2006 Passat 2.0T Join Date: Feb 2013 Location: Rochester,NY Posts: 852	Welcome. What do you have there fella? __________________ 2006 Passat 2.0T Tiptronic \| Unitronic Stage 2 \| DG Springs \| White Line Control Arm Bushings \| BFI Tranny Mount \| Newsouth Boost Gauge \| Rev D DV \| BSH PCV fix \| eBay Down Pipe w/cat \| Autotech Exhaust \| DDM HIDs \| Bentley Manual \| VCDS 2008 Touareg vr6 \| Stock and staying that way

02-20-2014, 03:38 PM	#6
Fernas Mexibahn Native Drives: F23T GLI DSG Join Date: Dec 2010 Location: Guadalajara, Mexico. Posts: 1,588	Kind of like this, but with less chrome. Interested. http://forums.vwvortex.com/showthrea...t-Valve-Covers __________________ \|\| F23T...Revo Stage 3 Tune 9-9-9 \|\| Autotech HPFP \|\| S3 Injectors \|\| RS4 PRV \|\| AFE Pro Dry S Intake \|\| DevilsOwn DVC-30 \|\| 3" Catless DP \|\| ECS Lightweight pulley \|\| BSH Catch Can \|\| BSH Solid Mounts \|\|

02-20-2014, 04:50 PM	#7
ErBall Measurement Mogul Drives: Rolling burnouts Join Date: Jun 2011 Location: Elkhart Posts: 383	Looking good. Got any dyno numbers? Just saying, an HEP manifold would look awesome in there. __________________ Build Thread

02-20-2014, 05:29 PM	#8
high_octane3541 Formula 5000 Driver Drives: 08 MkV GTI / 2016 S3 Join Date: Feb 2014 Location: McKinney, TX Posts: 1,789	My PTE5858 Long story short I use to have a k04...then went apr stg3. Then ditched the apr software and jumped over to eurodyne. I had Forced Performance modify the 2871r by putting their billet compressor wheel in and made 420whp @30psi with w/m. Lowered the boost to 26-27psi for daily driving so it was sitting around 400whp. Got bored with the power and I was pretty much maxed out for the efficiency of the turbo so I started putting another setup together. Current setup: - IE rifle drilled rods - JE pistons 9.5:1 CR - JE wristpins - ARP head studs - calico coated rod bearings - PTE5858 - FFE tubular mani - Custom downpipe - 4" intake - Tial WG - Tial BOV - Bsh motor/ trans mount/ Dogbone - HPA lower subframe mount - 034 upper subframe mount - IE valve cover and catch can - Fluidampr - APR Intercooler - APR RFD - RS4 injectors and rail valve - Eurodyne Maestro and Boost manager with w/m - USP lpfp - ceramic/ powder coating of all necessary parts Car will be going back to my tuner (Dubsquared) on March 3rd to dyno tune the new setup Still need to install this Shoutout to my friend JC for all the fab work. __________________ B00ST!!! IG: high_octane3541 Last edited by high_octane3541; 02-20-2014 at 06:08 PM.

02-20-2014, 05:47 PM	#11
ViRtUaLheretic ╭∩╮（︶__︶）╭∩╮ haters Drives: 2009 VW GTI TSI motor Join Date: Sep 2008 Location: KC MO Posts: 6,693	Nice setup man, looks good and can't wait to see the dyno #s of your new setup. How do you like the Boost Manager Plus? Eventually I would like to make the switch to Eurodyne and take advantage of BM+ for my direct port injection setup __________________ ::APR stage2::BSH -Intake,Mounts,TB Pipe,RSB::Eurojet v1.0 TBE::Whiteline -A.L.K. ::Devils Own DVC-30::Neuspeed -Discharge::BC Racing BR coils::Unibrace -xB & uB ::OSIR::Flik FTD::245x40x17::Porsche 17Z BBK::Bildon Studs::Hawk HPS Read this for TSI INFO/FAQ

02-20-2014, 06:00 PM	#12
flat tire Formula 5000 Driver Drives: Electric + 135i Join Date: May 2011 Location: USA Posts: 1,864	Great build from a Texan.

02-20-2014, 07:57 PM	#15
GIACUser Master Wallet Mechanic Drives: 2008 UG EFR7163 Join Date: May 2008 Location: SoCal Posts: 3,086	Yee Hah - damn that all looks very nice - I hope you post a good GoPro video when you are done so we can all go for a virtual ride in that beast. __________________ 2008 GTI EFR7163

02-20-2014, 08:02 PM	#16
Red5pade . Drives: Subaru Join Date: Apr 2012 Location: Pikeville, KY Posts: 6,247	post some videos please. looks awesome. whats the final goal? __________________ Sold car

02-20-2014, 09:06 PM	#18
613B6 Rally Car Champion Drives: GTI Join Date: Nov 2012 Location: Ottawa Posts: 382	Badass man! Fab works looks amazing. Boost manager and eurodyne ftw. __________________ Eurodyne remote tuning IG: 613B6

02-20-2014, 09:32 PM	#19
Tutti57 FIA GT Newbie Drives: 2006 Passat 2.0T Join Date: Feb 2013 Location: Rochester,NY Posts: 852	Looks so nice. All of those pieces look top notch. I'm very attracted to it. Anyone else feelin funny in the pants? __________________ 2006 Passat 2.0T Tiptronic \| Unitronic Stage 2 \| DG Springs \| White Line Control Arm Bushings \| BFI Tranny Mount \| Newsouth Boost Gauge \| Rev D DV \| BSH PCV fix \| eBay Down Pipe w/cat \| Autotech Exhaust \| DDM HIDs \| Bentley Manual \| VCDS 2008 Touareg vr6 \| Stock and staying that way

02-21-2014, 11:34 AM	#21
NJdubber Performance Enthusiast Drives: 2006 Audi A3 Join Date: Jun 2009 Location: Northern NJ Posts: 2,431	Nice car and nice build, that FFE manifold is just sexy! __________________ 2006 Audi A3 Brilliant Red: FrankenTurbo, .dotuning, FFE, APR, Forge, SPM, BSH, VF-Engineering, Precision Turbo, ATP, Vogtland, Well-Done Xenons.

02-21-2014, 02:19 PM	#22
high_octane3541 Formula 5000 Driver Drives: 08 MkV GTI / 2016 S3 Join Date: Feb 2014 Location: McKinney, TX Posts: 1,789	Thanks guys. Few other mods that I've done: - hotchkis f/r swaybars - whiteline control arm bushings - Adams Rotors: slot and dimple - stoptech pads Got rid of my B&Gs and just installed the pss10 3 weeks ago I'm sure I'm forgetting other things that I've done. I'll post em up if I remember Oh, don't think i mentioned it earlier but the car is DSG __________________ B00ST!!! IG: high_octane3541