Eurocars build thread

FMX_DBC · Apr 5, 2016

I had not seen those calipers yet. Those suckers look good!

projectDIY · Apr 7, 2016

eurocars said:
Here's a couple I had on my phone. Neither use the IE plate but both deleted the DI

:wub:, any build thread links or more pics?

eurocars · Apr 7, 2016

No build threads, but some info on the setups:

http://www.clubgti.com/showthread.php?279480-NASP-FSI-Content-2-2-litre-and-9600-rpm-Read-on!

http://www.clubgti.com/showthread.php?231081-2-0T-FSI-MK1-Golf-450bhp

eurocars · Apr 7, 2016

So apparently my wheels wont fit now without a ~30mm spacer. Currently I have BBS CH plasmas (18x8 +38). Any thoughts on replacements that will fit 18Z's? I have camber plates and SRS-TEC wide fenders so I should be able to fit more than someone with a standard GTI suspension and fender setup

Softishman · Apr 7, 2016

A quick question eric.
Does this partnumber on a throttle body fit my ed30;
03H133062. Siemens tb
It is from an passat 2007 3,2 v6. ???
It should be bigger then my stock one..

Or must i have this;
06E133062C VDO
Audi A4 2009 3,2FSI

Thanks!

Love your build btw!!

Wheels that may fit are, OZ Ultraleggera 18" & 19", ATS racelight 19" ( i have thoose

) and audi rotor (s3,s5 etc)

xSabretoothx · Apr 7, 2016

Ultraleggeras, for the win!!

eurocars · Apr 7, 2016

Softishman said:
A quick question eric.
Does this partnumber on a throttle body fit my ed30;
03H133062. Siemens tb
It is from an passat 2007 3,2 v6. ???
It should be bigger then my stock one..

Or must i have this;
06E133062C VDO
Audi A4 2009 3,2FSI

Thanks!

Love your build btw!!

Wheels that may fit are, OZ Ultraleggera 18" & 19", ATS racelight 19" ( i have thoose ) and audi rotor (s3,s5 etc)

The audi 3.2 tb I have was P/N 022133062 and it did not fit. I had the part number that worked saved on an old laptop but it has since gone missing so I cant look it up. I know the P/N I had ended in rev G if that helps any. I was told it was a Q5 3.2 (which is the pn above which I bought and it didnt fit). I'll see if I can dig some more

Softishman · Apr 7, 2016

Ok, so the first siemens wont fit then... Hopefully the other should fit?! Hope you find more info on this! Thanks!!

Mayby this one; 022133062AG

gti2slow · Apr 7, 2016

eurocars said:
No build threads, but some info on the setups:
http://www.clubgti.com/showthread.php?279480-NASP-FSI-Content-2-2-litre-and-9600-rpm-Read-on!

Interesting tidbit from that thread, you mentioned the N/A FSI head flowing more:

BPY cylinder head stock ports,

Standard size Supertech valves,

eurocars · Apr 7, 2016

I don't think he thought about using a European head. I've actually talked to him about the build. He's the guy I bought the FSI to B16 ITB adapter from

dustinwark · Apr 7, 2016

eurocars · Apr 8, 2016

Hey bud. How's the northwest treating you?

dustinwark · Apr 8, 2016

eurocars said:
Hey bud. How's the northwest treating you?

Sun is shining, birds are chirping, beer is tasty. No complaints :smile:

eurocars · Apr 10, 2016

Got my ABS module mounted on the dash support bar, just waiting for my AN adapter fittings to arrive so I can start measuring for lines. If anyone has a diagram for brake line routing from the ABS module, that would be great. I don't have the old labels on the lines anymore. Parts diagram would probably show it

Joshohol · Apr 10, 2016

sweet jesus that interior is so apart

Sent from my SM-N920P using Tapatalk

Eurocars build thread

FMX_DBC

Dirt Bike Craig

projectDIY

New member

eurocars

5/17/15 - Never forget

eurocars

5/17/15 - Never forget

Softishman

Ready to race!

xSabretoothx

Fast w/ training wheels

Attachments

eurocars

5/17/15 - Never forget

Softishman

Ready to race!

gti2slow

Go Kart Champion

eurocars

5/17/15 - Never forget

dustinwark

Miesian

eurocars

5/17/15 - Never forget

dustinwark

Miesian

eurocars

5/17/15 - Never forget

Joshohol

Go Kart Champion