GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV


  VW GTI Forum / VW Rabbit Forum / VW R32 Forum / VW Golf Forum - Golfmkv.com


 
Register
MYGOLF garage
Timeslips
Search
Members List
Search Today's Posts Mark Forums Read



Go Back   VW GTI Forum / VW Rabbit Forum / VW R32 Forum / VW Golf Forum - Golfmkv.com > Main Topics > GTI / Rabbit / Golf MkV General Discussions



Reply
 
Thread Tools
Old 01-12-2019, 02:22 PM   #243
Mostic
FIA GT Champion
 
Mostic's Avatar
 
Drives: 07 MKV GTI
Join Date: Apr 2013
Location: Egypt
Posts: 1,001
Hello,
Do you know how to weld the fuel tank?
It’s for my Scirocco project.
Mostic is offline   Reply With Quote
Old 02-16-2019, 04:21 PM   #244
Mostic
FIA GT Champion
 
Mostic's Avatar
 
Drives: 07 MKV GTI
Join Date: Apr 2013
Location: Egypt
Posts: 1,001
Okay, here are few updates;

I started to work on the Quattro project...

Preparing for the AWD.











Open the second hole for the tank.



Covering the welding.









Close to finish.







Haldex installed and coded





Then as all projects you should have a problem that complicate it

ABS error;



I checked similar project who had the same issue, but he changed the cluster from Scirocco and replaced by Golf R one.
Here is his comment
“However, the conversation gradually drew the attention to the fact that the ABS control device is so "crooked" that it listens the vehicle model / type code sent from the CAN bus to the instrument panel and does not encode the conflicting type code itself. That is, when the instrument panel claims a car to Scirocco, the ABS control device does not allow it to encode itself to Golf. And Scirocco can't be a four-wheel drive. On the instrument panel, that type is "hard-coded", but it cannot be changed by VCDS.”

I believe if the Scirocco instrument cluster changed from FWD to AWD then the ABS fault will disappear. I don’t know how yet but hopefully will figure it out, all support are more than welcome :)

Stay tuned, more is coming
Mostic is offline   Reply With Quote
Old 02-18-2019, 10:45 AM   #245
Mostic
FIA GT Champion
 
Mostic's Avatar
 
Drives: 07 MKV GTI
Join Date: Apr 2013
Location: Egypt
Posts: 1,001
Here is the AWD video.

https://vimeo.com/317987684
Mostic is offline   Reply With Quote
Old 02-18-2019, 12:27 PM   #246
GIACUser
Master Wallet Mechanic
 
GIACUser's Avatar
 
Drives: 2008 UG EFR7163
Join Date: May 2008
Location: SoCal
Posts: 3,123
Congratulations! So jealous, that you have Scirocco and now an AWD. I would much rather have that body style.
__________________
2008 GTI EFR7163
GIACUser is offline   Reply With Quote
Old 02-18-2019, 04:28 PM   #247
Mostic
FIA GT Champion
 
Mostic's Avatar
 
Drives: 07 MKV GTI
Join Date: Apr 2013
Location: Egypt
Posts: 1,001
Quote:
Originally Posted by GIACUser View Post
Congratulations! So jealous, that you have Scirocco and now an AWD. I would much rather have that body style.


Thanks! I like the Scirocco style so much that’s why I insisted to have the AWD on it instead of the MK6 while it was gonna be easier with the MK6
Mostic is offline   Reply With Quote
Old 02-18-2019, 04:31 PM   #248
Mostic
FIA GT Champion
 
Mostic's Avatar
 
Drives: 07 MKV GTI
Join Date: Apr 2013
Location: Egypt
Posts: 1,001
Mission accomplished!



Just few modifications in the suspension and bushing then I can drive it. Unfortunately, it will be with the K04 turbo instead of the BT for the time being but at least a serious step is achieved.

Stay tuned, more is coming
Mostic is offline   Reply With Quote
Old 02-26-2019, 06:43 PM   #249
Mostic
FIA GT Champion
 
Mostic's Avatar
 
Drives: 07 MKV GTI
Join Date: Apr 2013
Location: Egypt
Posts: 1,001
Quick updates;

New Ultra Racing Bars







And 3D cluster



More is coming very soon
Mostic is offline   Reply With Quote
Old 03-01-2019, 11:45 PM   #250
Mostic
FIA GT Champion
 
Mostic's Avatar
 
Drives: 07 MKV GTI
Join Date: Apr 2013
Location: Egypt
Posts: 1,001
3D cluster is working fine





Mostic is offline   Reply With Quote
Old 04-13-2019, 11:27 AM   #251
Mostic
FIA GT Champion
 
Mostic's Avatar
 
Drives: 07 MKV GTI
Join Date: Apr 2013
Location: Egypt
Posts: 1,001
Changed the VMR wheels today to the Audi 19” one.







I like the VMR more
Most probably I will paint the Audi wheels maybe I will accept it!
Mostic is offline   Reply With Quote
Old 04-13-2019, 01:12 PM   #252
GIACUser
Master Wallet Mechanic
 
GIACUser's Avatar
 
Drives: 2008 UG EFR7163
Join Date: May 2008
Location: SoCal
Posts: 3,123
Love that body style, sooo jealous. New wheels look great.
__________________
2008 GTI EFR7163
GIACUser is offline   Reply With Quote
Old 04-13-2019, 01:17 PM   #253
Mostic
FIA GT Champion
 
Mostic's Avatar
 
Drives: 07 MKV GTI
Join Date: Apr 2013
Location: Egypt
Posts: 1,001
Quote:
Originally Posted by GIACUser View Post
Love that body style, sooo jealous. New wheels look great.

Thanks my friend, I love it too :)
Which one looks better, 18” VMR or the 19” Audi?
And what about the 19” Audi color, is it okay? Or better to paint it another color?

I found these pics on Internet for same wheels painted to different color.





Mostic is offline   Reply With Quote
Old 04-13-2019, 03:34 PM   #254
GIACUser
Master Wallet Mechanic
 
GIACUser's Avatar
 
Drives: 2008 UG EFR7163
Join Date: May 2008
Location: SoCal
Posts: 3,123
Quote:
Originally Posted by Mostic View Post
Thanks my friend, I love it too :)
Which one looks better, 18” VMR or the 19” Audi?
And what about the 19” Audi color, is it okay? Or better to paint it another color?

I found these pics on Internet for same wheels painted to different color.





Each to his own on wheel color but like the look of the 19's and for me silver looks good because I like the stealthy look.
__________________
2008 GTI EFR7163
GIACUser is offline   Reply With Quote
Old 06-01-2019, 10:20 AM   #255
Nitrous1024
Touring Car Champion
 
Drives: 2008 MK5 Golf GTI (Autobahn)
Join Date: Jun 2016
Location: Kingston, Jamaica
Posts: 245
Subscribed

Quote:
Originally Posted by Mostic View Post
I have a question regarding the OEM Oil Temp...

I am using a Med9 ECU with the below details;
- ECU Hardware Number: 1K0907115A
- ECU Software Number: 1K0907115R 0020

The Oil Temperature doesn’t appear in the instrument/cluster, if I flashed the Med9 ECU by 1K0907115Q 0020 SW then the Oil Temperature appears in instrument/cluster.
I tried using the PolarFIS to see if it will work on it or not and I found the Oil Temperature appears with -60 with 1K0907115R 0020; then I flashed the same Med9 ECU with 1K0907115Q 0020 SW and I found the Oil Temperature appears and work normally in the instrument/cluster and in the PolarFIS too!
That means the wiring of the Oil temperature sensor is installed correctly and there is no problem with it.

Also, I tried all the above with ECU Hardware Number: 8P0907115B and same issue and results existed with it too!

Note: The Oil Temperature sensor is the VW OEM one not an aftermarket one.
What did you use to flash the revision "Q" software?

I have the Kufatec unit, but I can't see my oil temperature either.
Nitrous1024 is offline   Reply With Quote
Old 06-01-2019, 10:26 AM   #256
Mostic
FIA GT Champion
 
Mostic's Avatar
 
Drives: 07 MKV GTI
Join Date: Apr 2013
Location: Egypt
Posts: 1,001
Quote:
Originally Posted by Nitrous1024 View Post
What did you use to flash the revision "Q" software?



I have the Kufatec unit, but I can't see my oil temperature either.


I used ODIS tool to flash the Q revision.
Don’t know much info about the Kufatec tool.
If the oil temp sensor is installed and connected to the ECU & Cluster then let me know the existed SW version you have.
Mostic is offline   Reply With Quote
Old 06-01-2019, 10:28 AM   #257
Nitrous1024
Touring Car Champion
 
Drives: 2008 MK5 Golf GTI (Autobahn)
Join Date: Jun 2016
Location: Kingston, Jamaica
Posts: 245
Quote:
Originally Posted by CPT.SLO View Post
Wow crazy to think a GTI could be worth $100,000 in other countries, when you could pick them up for like $8000 in my area.
In Jamaica, my MK5 GTI is valued and insured at $J 1,850,000.

Today, the exchange rate is $132.8 Jamaican dollars to purchase $1 American currency.
Nitrous1024 is offline   Reply With Quote
Old 06-01-2019, 04:38 PM   #258
Nitrous1024
Touring Car Champion
 
Drives: 2008 MK5 Golf GTI (Autobahn)
Join Date: Jun 2016
Location: Kingston, Jamaica
Posts: 245
Quote:
Originally Posted by Mostic View Post
I used ODIS tool to flash the Q revision.
Don’t know much info about the Kufatec tool.
If the oil temp sensor is installed and connected to the ECU & Cluster then let me know the existed SW version you have.
Address 01: Engine Labels:. 06F-907-115-AXX.clb
Part No SW: 1K0 907 115 R HW: 8P0 907 115 B
Component: 2.0l R4/4V TFSI 0020
Revision: 5BH16--- Serial number: VWX7Z0G83NA8OV
Coding: 040300101C070160
Shop #: WSC 66565 257 00032
VCID: 354FD8585CDD5EECC7-8060

1 Fault Found:
000054 - Oxygen (Lambda) Sensor B1 S2: Heating Circuit
P0036 - 004 - Malfunction / Open Circuit
Freeze Frame:
Fault Status: 01100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 255
Mileage: 178741 km
Time Indication: 0
Date: 2000.00.00
Time: 08:06:53

Freeze Frame:
RPM: 759 /min
Load: 18.4 %
Speed: 0.0 km/h
Temperature: 87.0°C
Temperature: 45.0°C
Absolute Pres.: 1000.0 mbar
Voltage: 13.462 V

Readiness: 0110 0001



I don't "know" if the sensor is actually installed in my MK5 GTI, since I don't know where to check the sensor.


Is your copy of ODIS a genuine one or a clone? I'm trying to determine if the ones I see on eBay, can do software updates to the modules themselves.
Nitrous1024 is offline   Reply With Quote
Old 06-01-2019, 06:18 PM   #259
Mostic
FIA GT Champion
 
Mostic's Avatar
 
Drives: 07 MKV GTI
Join Date: Apr 2013
Location: Egypt
Posts: 1,001
Quote:
Originally Posted by Nitrous1024 View Post
Address 01: Engine Labels:. 06F-907-115-AXX.clb

Part No SW: 1K0 907 115 R HW: 8P0 907 115 B

Component: 2.0l R4/4V TFSI 0020

Revision: 5BH16--- Serial number: VWX7Z0G83NA8OV

Coding: 040300101C070160

Shop #: WSC 66565 257 00032

VCID: 354FD8585CDD5EECC7-8060



1 Fault Found:

000054 - Oxygen (Lambda) Sensor B1 S2: Heating Circuit

P0036 - 004 - Malfunction / Open Circuit

Freeze Frame:

Fault Status: 01100100

Fault Priority: 2

Fault Frequency: 1

Reset counter: 255

Mileage: 178741 km

Time Indication: 0

Date: 2000.00.00

Time: 08:06:53



Freeze Frame:

RPM: 759 /min

Load: 18.4 %

Speed: 0.0 km/h

Temperature: 87.0°C

Temperature: 45.0°C

Absolute Pres.: 1000.0 mbar

Voltage: 13.462 V



Readiness: 0110 0001







I don't "know" if the sensor is actually installed in my MK5 GTI, since I don't know where to check the sensor.





Is your copy of ODIS a genuine one or a clone? I'm trying to determine if the ones I see on eBay, can do software updates to the modules themselves.


Buy this tool it works with me...

http://www.buyobdii.com/vas-6154-odi...ol-p-1599.html

Once you have it, I will send you the Q version.

The oil level/temp sensor located in the oil pan.



Mostic is offline   Reply With Quote
Old 06-01-2019, 07:03 PM   #260
Nitrous1024
Touring Car Champion
 
Drives: 2008 MK5 Golf GTI (Autobahn)
Join Date: Jun 2016
Location: Kingston, Jamaica
Posts: 245
In that case: Yes, I have that sensor bolted to my oil pan. I thought it was the oil level sensor to warn me if the oil level is low. I'm going to buy what you sent me right now.

Edit: I just bought it. It will take a few weeks to arrive to me in Jamaica.
Nitrous1024 is offline   Reply With Quote
Old 06-01-2019, 07:14 PM   #261
Mostic
FIA GT Champion
 
Mostic's Avatar
 
Drives: 07 MKV GTI
Join Date: Apr 2013
Location: Egypt
Posts: 1,001
Quote:
Originally Posted by Nitrous1024 View Post
In that case: Yes, I have that sensor bolted to my oil pan. I thought it was the oil level sensor to warn me if the oil level is low. I'm going to buy what you sent me right now.

Edit: I just bought it. It will take a few weeks to arrive to me in Jamaica.

I will upload later the Odis Engineering and send you the link to download it so you can flash any .SGO file you may want/need.
Mostic is offline   Reply With Quote
Old 06-26-2019, 07:19 PM   #262
Nitrous1024
Touring Car Champion
 
Drives: 2008 MK5 Golf GTI (Autobahn)
Join Date: Jun 2016
Location: Kingston, Jamaica
Posts: 245
Quote:
Originally Posted by Mostic View Post
Buy this tool it works with me...

http://www.buyobdii.com/vas-6154-odi...ol-p-1599.html

Once you have it, I will send you the Q version.

The oil level/temp sensor located in the oil pan.
I have this item in hand right now. I'm asking you for the Q version.
Why would VW provide me the sensor if there was no way for the driver (or the ECU to use it)?

Would flashing the "Q" version trip my immobiliser or cause me to lose my custom software tune?
Nitrous1024 is offline   Reply With Quote
Old 06-27-2019, 03:51 AM   #263
Mostic
FIA GT Champion
 
Mostic's Avatar
 
Drives: 07 MKV GTI
Join Date: Apr 2013
Location: Egypt
Posts: 1,001
Quote:
Originally Posted by Nitrous1024 View Post
I have this item in hand right now. I'm asking you for the Q version.

Why would VW provide me the sensor if there was no way for the driver (or the ECU to use it)?



Would flashing the "Q" version trip my immobiliser or cause me to lose my custom software tune?

Congratulations for receiving the tool.
I am on vacation now, I will send you the Q version once back.
Don’t know the reason for VW, but I am enjoying seeing the oil temp on my MFD and it’s really nice.

Flashing the Q version shouldn’t impact the immobilizer but for sure you will lose any tune you have on the ECU!
Mostic is offline   Reply With Quote
Old 06-27-2019, 10:47 AM   #264
Nitrous1024
Touring Car Champion
 
Drives: 2008 MK5 Golf GTI (Autobahn)
Join Date: Jun 2016
Location: Kingston, Jamaica
Posts: 245
I've been playing with the tool last night (not the way that it sounds). My issue is that I can't actually use the "Flashing" option from the copy of the ODIS software I received, as I'd need to have a valid login. I was hoping to simply select a "local" file on my laptop like the one you would provide for me.

Please do enjoy your vacation.
Nitrous1024 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:01 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.