I opened it up again today and it seems I managed to install the chain incorrectly by setting the chain at 18 rollers between marks instead of 18 gaps.
With 18 gaps there are 19 rollers between the mark on the intake camshaft and the cam adjuster.
I'm back to 28 KW Cam Adjustment Intake B1 actual, (matching the spec) but I am at -7 KW for Phase position (down from -9 with the old VVT system).
The car pulls strong again but I still get this code: P000A/000010 - Camshaft A (Bank 1 Intake): Positioner Slow Response - Intermittent
Not sure if I should still do the cams or not. I'm afraid of spending the money and effort and not solving this.
With 18 gaps there are 19 rollers between the mark on the intake camshaft and the cam adjuster.
I'm back to 28 KW Cam Adjustment Intake B1 actual, (matching the spec) but I am at -7 KW for Phase position (down from -9 with the old VVT system).
The car pulls strong again but I still get this code: P000A/000010 - Camshaft A (Bank 1 Intake): Positioner Slow Response - Intermittent
Not sure if I should still do the cams or not. I'm afraid of spending the money and effort and not solving this.