Light brightness adjustment through VAGCOM
Thread ressurection.
You can add this to your PDF if you want DPham.
You can also adjust the brightness of the DRL (assuming halogens, i have xenons so i can't confirm), front fogs, rear park, rear brake lights as park lights, rear fog as park light.
Refer to DPham's PDF, or easier still just move through the bytes on your VAGCOM under central convenience.
The decimal values are how BRIGHT you want them to be, not how much to dim by (as you would assume by reading the vagcom screen), i.e. 0=off, 100=maximum brightness.
The rear park is the inside (hatch half) of the rear light, the brake is the outer half. Normally set at 20, and you wouldn't want them set at 100, or no one could tell the difference when you brake...
Couldn't seem to get any difference with front park light dimming values.
Anyone used the "backup" function of fogs for front low beams? I assume this would mean that in the event the front headlights fail that the fogs would kick in? Anyone with halogen lights and vagcom care to remove the plugs (so you don't have to remove the whole bulb) and check?
BTW interesting that some of the entries in the 607 version of VAGCOM are different/missing in the 704 version...