Vag Com codes, wondering if I should be concerned

[drtechy]

So I was getting my LED tails all coded up correctly, and decided to scan my car. Found a bunch of codes that I didn't realize I was getting. Anyone know what these could be? I plan on taking it to the dealership soon anyway, but just figured I'd ask here too. I took out all the crap and ones that I already knew what they were.


Chassis Type: 1K0
Scan: 01 03 08 09 0F 15 16 17 19 1C 25 42 44 46 52 55 56 65

Mileage: 153020km/95082miles

17-Instruments -- Status: Malfunction 0010
19-CAN Gateway -- Status: Malfunction 0010
1C-Position Sensing -- Status: Malfunction 0010
44-Steering Assist -- Status: Malfunction 0010
55-Xenon Range -- Status: Malfunction 0010

-------------------------------------------------------------------------------
Address 17: Instruments Labels: 1K0-920-xxx-17.lbl
Part No SW: 1K6 920 974 A HW: 1K6 920 974 A
Component: KOMBIINSTRUMENT VDD 2216
Revision: V0002000 Serial number: VWX7Z0H23NI8LZ
Coding: 0000103
Shop #: WSC 01287 785 00200
VCID: 3260E6ABD4BF

2 Faults Found:
01325 - Control Module for Tire Pressure Monitoring (J502)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 217
Mileage: 0 km
Time Indication: 0

01312 - Powertrain Data Bus
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 217
Mileage: 0 km
Time Indication: 0

------------------------------------------------------------------------------
Address 1C: Position Sensing Labels: 1Kx-919-xxx-1C.lbl
Part No SW: 1K6 919 879 HW: 1K6 919 879
Component: Kompass 001 0003
Revision: 00001000 Serial number: 1225223T2XLM03
Shop #: WSC 00000 000 00000
VCID: FDFA8597DD61

1 Fault Found:
00466 - Control Module for Steering Column Electronics (J527)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 3
Fault Frequency: 1
Reset counter: 217
Time Indication: 0


Address 44: Steering Assist Labels: 1Kx-909-14x-44.clb
Part No: 1K1 909 144 M
Component: EPS_ZFLS Kl.074 H08 1901
Shop #: WSC 00000 028 00001
VCID: 356ADDB725D1

1 Fault Found:
01299 - Diagnostic Interface for Data Bus (J533)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Mileage: 152220 km
Temperature: 28.0°C
Voltage: 12.00 V
Voltage: 11.80 V

Address 55: Xenon Range Labels: 1T0-907-357.lbl
Part No: 1T0 907 357
Component: Dynamische LWR 0003
Coding: 0000003
Shop #: WSC 01279 785 00200
VCID: F4ECA0B3EE2B

1 Fault Found:
01317 - Control Module in Instrument Cluster (J285)
004 - No Signal/Communication - Intermittent

 

[drtechy]

wow 46 views and nobody? lol

 

[BlackVR]

Since they're all intermittent no signal, I wouldn't worry about it. Clear them and if any come back, then start looking at fixing them. None of those jump out at me and say, "OMG this needs to be looked at NOW."

 

[merkeyterkey]

Go to Ross-Tech's website and search those codes. It'll tell you what they are and what might be causing them.