GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV
  • Has your username changed as part of the site merger and want it changed back? If the other version of your username isn't being used, send Gulfer a PM and we can probably fix it for you

Torque specs?

Helistyle

www.lowmain.net
Location
CT
Ride
2006 GTI
I plan on installing some springs coming soon on my 2006 gti 2.0, and was wondering if there is somewhere that has the torque specs on all the bolts and such?
 

ik1015

beeee patient ^^
Location
VA
Ride
MK7 GLI
FRONT TORQUE

Suspension strut mount to damper
Use new nut
60 Nm = 44.25 lb-ft
N-910-216-01 x 2

Suspension strut to wheel bearing housing
Use new nut
70 Nm + quarter turn (90°) = 51.63 lb-ft + 90°
N-101-064-02 x 2

Suspension strut to body (suspension strut tower)
Use new bolts
15 Nm + quarter turn (90°) = 11.06 lb-ft + 90°
N-101-277-07 x 6

Ball joint to control arm
Use new nut
60 Nm = 44.25 lb-ft
N-103-320-02 x 6 -???

Connecting link to suspension strut
Use new nut
Counter hold at joint pin inner multi-point fitting
65 Nm = 47.94 lb-ft
N-015-081-6 x 2

Drive axle to wheel hub “hex head bolt”
Use new bolt
200 Nm + one half turn (180°) = 147.51 lb-ft + 180°
N-910-406-01 x 2

Drive axle to wheel hub “12-point bolt”
Use new bolt
70 Nm + quarter turn (90°) = 51.63 lb-ft + 90°
N-101-064-02 x 2

REAR TORQUE

Lower control arm 2 wheel bearing housing
Use new nut
90 Nm + quarter turn (90°)
N-106-286-01 x 2
N-101-064-02 x 2

Rear upper strut mount: 37 ft/lb + 45degree turn
Shock lower mounting bolt: 133 ft/lb

Wheel LUG BOLTS

88~89 ft/lb
 

apollosfury

designeddwk
Location
VT
FRONT TORQUE

Suspension strut mount to damper
Use new nut
60 Nm = 44.25 lb-ft
N-910-216-01 x 2

Suspension strut to wheel bearing housing
Use new nut
70 Nm + quarter turn (90°) = 51.63 lb-ft + 90°
N-101-064-02 x 2

Suspension strut to body (suspension strut tower)
Use new bolts
15 Nm + quarter turn (90°) = 11.06 lb-ft + 90°
N-101-277-07 x 6

Ball joint to control arm
Use new nut
60 Nm = 44.25 lb-ft
N-103-320-02 x 6 -???

Connecting link to suspension strut
Use new nut
Counter hold at joint pin inner multi-point fitting
65 Nm = 47.94 lb-ft
N-015-081-6 x 2

Drive axle to wheel hub “hex head bolt”
Use new bolt
200 Nm + one half turn (180°) = 147.51 lb-ft + 180°
N-910-406-01 x 2

Drive axle to wheel hub “12-point bolt”
Use new bolt
70 Nm + quarter turn (90°) = 51.63 lb-ft + 90°
N-101-064-02 x 2

REAR TORQUE

Lower control arm 2 wheel bearing housing
Use new nut
90 Nm + quarter turn (90°)
N-106-286-01 x 2
N-101-064-02 x 2

Rear upper strut mount: 37 ft/lb + 45degree turn
Shock lower mounting bolt: 133 ft/lb

Wheel LUG BOLTS

88~89 ft/lb
good to have these #'s just in case.
 

CameronR

Passed Driver's Ed
Location
Canada
Bump! I am looking for the torque specs for the balljoint to spindle nut (large single nut facing up, not the three that point down. Also, the front control arm bolt.

thanks!
Cam
 
Top