Sensor issues

[Miller7ime43]

Hi
New to the group, recently bought a mark 5 1.4 TSI GT 140
Cars mint on 114 thousand miles, but unfortunately it’s has two codes popped up! one is a camshaft position sensor (G40) out of range P3008
The other is a fuel pressure regulator valve (N276) mechanical malfunction P2293 intermittent
I’ve took the car back to the Garage I bought it from but there still struggling to get the EML light I go off? Any help would be much appreciated dudes ??

 

[ROH ECHT]

Why are they trying to clear it without fixing it?
This really is the wrong forum for your car. Have you had no luck with searching the web? Here is one issue you may consider for the cam position code; https://forums.ross-tech.com/showthread.php?11930-Polo-1-4TDI-Bluemotion-2009-will-not-start

Also, having just bought it...I would think that someone may have wrenched on it that wasn't exactly qualified to do so. I would be highly suspicious of its timing. Because the code can only be due to faulty wiring or connection to the sensor, the sensor itself, or cam timing.

The fuel pressure regulator for its rail pressure is likely damaged or is cracked. Also, its cam lobe may be worn.
Here is a 1.4 dual-charged engine pdf...not exactly sure it is your engine however; http://www.volkspage.net/technik/ssp/ssp/SSP_359.pdf