Ok first does the window switch on that door work normal or backwards?
If it is backwards then the module on that door either went bad or was bad from the get go.
On the window motor it's self is the control module. If you take that apart and swap the 2 wires going to the motor it's self things will work correctly.
SC28 (30A),SC24 (20A), and SC38 (20A) are the fuses supplying power to the rear
doors.
On the window module there should be 4 wires coming in from the hinge
9 goes to ground
10 goes to the 30A fuse
11 goes to the 20A fuse
12 goes to the front door module (communication)
1, 3, 5, 6, 7, 15 all go over to the power lock assembly
2, 16, and 18 go to the power window switch in that door
If the switch on that door works normal but all the others (drivers door) is backwards you have some sort of communication issues along the way. Could just be the front passenger side door control module, Body module, Drivers door module, ect (ie pain in the ass)