GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV
  • Has your username changed as part of the site merger and want it changed back? If the other version of your username isn't being used, send Gulfer a PM and we can probably fix it for you

Mk6 GTI Steering Wheel to Mk5 GTI

cbx750p

New member
Is it possible to fit the Mk6 GTI steering wheel onto a Mark5 with all the functions working ?

Updated : 27 October 2010
Mk6 Climatronic and Golf R MFSW
 
Last edited:

Rob2.5

Ready to race!
Location
North New Jersey
Ride
2010 Golf MKVI
Yeah it is. Just need to buy the right wheel and airbag. I'm not sure if there's anything else involved and then some VAGCOM work after all is said and done I believe.

There's even a thread of a mk6 wheel in a mk4
 

GTI6120

Go Kart Champion
Location
Georgia
Ride
2008 GTI, 08 A3
I went to the dealership yesterday to get an oil change and sat in the Mk6, steering wheel is definitely cool. Where is the cheapest place to buy the wheel and any DIY installs?
 

victim2009

Passed Driver's Ed
Location
ASIA
Yeah it is. Just need to buy the right wheel and airbag. I'm not sure if there's anything else involved and then some VAGCOM work after all is said and done I believe.

There's even a thread of a mk6 wheel in a mk4
any link page? i am interested with, hope fully can DIY

Thanks

Cheers
 

jakethemoss

Ready to race!
Location
Denmark
Ride
Mercedes Sprinter
link or it never happened...

actually you can reuse the airbag itself, but you need a revision C slipring, steering coloumn controller needs to bee a CH revision, and if you have cruise control, the stalk has to be replaced with the 1K0 953 513 G stalk from the Mk 6.
i have function in 10 of the 12 buttons on the sw. you should be able to gain function of all 12 buttons, but i believe it requires the latest revision canbus gateway. :thumbsup:
 

Azone

Ready to race!
Location
USA
Ride
2009 VW Jetta MKV TD
^That looks great. Do all of the buttons function properly with the MFD and RNS510?

Oh, just on a side note. I notice you have a TDI. How well does the upgraded instrument cluster work (with different icons and different redlines)?
 

mortygt140

Ready to race!
Location
Leeds, England
Ride
Golf GT TDI
Azone all the buttons work fine apart from the left side left and right buttons they change track in the mk6 but the mk5 they are not designated buttons.

The cluster works fine the only thing I've not got is the coil light for the glowplugs but not a biggy, the revs work normally like in a diesel just go upto 4/5 - 5k revs.

Cheers

Darren
 

victim2009

Passed Driver's Ed
Location
ASIA
Azone all the buttons work fine apart from the left side left and right buttons they change track in the mk6 but the mk5 they are not designated buttons.

The cluster works fine the only thing I've not got is the coil light for the glowplugs but not a biggy, the revs work normally like in a diesel just go upto 4/5 - 5k revs.

Cheers

Darren
bro,

How much you bought the Steering Wheel? and how many hour for the job?
need VAG-com?

I am interested to convert it, glad if you have the video shot while they swop process.

Do you think possible for DIY?

Look forward to hear from you

Cheers
:)
 

victim2009

Passed Driver's Ed
Location
ASIA
It cost me about $350 including the airbag from Portugal

http://cgi.ebay.co.uk/Volkswagen-VW-Golf-6-VI-GTI-Steering-Wheel-MF-AIRBAG_W0QQitemZ220569708123QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item335afaa65b#ht_500wt_975

It took about 1 hour to change the actual wheel over but another hour to change the controller over and code up with vag com. No vid sorry

Darren
Hi Darren,

do i need to get the module in order make all the button work? so i need to get back to SC to reset Code over the VAG-com?

your infor are much appreciate.

Look forward to hear from you

Thank in advance

cheers:)
 

jakethemoss

Ready to race!
Location
Denmark
Ride
Mercedes Sprinter
Hi Darren,

do i need to get the module in order make all the button work? so i need to get back to SC to reset Code over the VAG-com?

your infor are much appreciate.

Look forward to hear from you

Thank in advance

cheers:)
You need the steering coloumn controller to get the buttons to work, no controller= no buttons, period.
Also not all the buttons works, as the mk 5 has 4 buttons on each side, the Mk 6 has 6 on each side.
This im not sure of, but i believe that you need the latest canbus revision to get all the buttons to work.
Remember that to get the C/C function to work you need the mk 6 C/C stalk, trust me i know :fighting0030: :thumbsup:
 

victim2009

Passed Driver's Ed
Location
ASIA
You need the steering coloumn controller to get the buttons to work, no controller= no buttons, period.
Also not all the buttons works, as the mk 5 has 4 buttons on each side, the Mk 6 has 6 on each side.
This im not sure of, but i believe that you need the latest canbus revision to get all the buttons to work.
Remember that to get the C/C function to work you need the mk 6 C/C stalk, trust me i know :fighting0030: :thumbsup:
Hi Jake, do you know any link to see the process of dismantle+install MK6 steering wheels?

so where to get MK6 C/C Stalk? and where to get the mk6 steering wheels? ebay? or others source?

your infor are much appreciate.

Cheers
:)
 

jakethemoss

Ready to race!
Location
Denmark
Ride
Mercedes Sprinter
Hi Jake, do you know any link to see the process of dismantle+install MK6 steering wheels?

so where to get MK6 C/C Stalk? and where to get the mk6 steering wheels? ebay? or others source?

your infor are much appreciate.

Cheers
:)

Fleebay is the place to find a mk 6 MFSW,
The mk 6 C/C stalk has partnumber 1K0 953 513 G
Steering coloumn controller is partnumber 1K0 953 549 CH.
The slipring needs to be the C revision 1K0 959 653

I don't have a DIY, but when you have the parts in your hand it's quite selfexplainatory. :thumbsup:
I believe there's one here on the vortex that can be used. :smile:
 
Last edited:

victim2009

Passed Driver's Ed
Location
ASIA
Fleebay is the place to find a mk 6 MFSW,
The mk 6 C/C stalk has partnumber 1K0 953 513 G
Steering coloumn controller is partnumber 1K0 953 549 CH.
The slipring needs to be the C revision ( I can't remember the number, but if you VCDS your car you get the partnumber including your current revision, might be a revision C already)

I don't have a DIY, but when you have the parts in your hand it's quite selfexplainatory. :thumbsup:
I believe there's one here on the vortex that can be used. :smile:
Bro, many thanks for you info, by the way do you know where can i get the 'RED STICHING' MK6 Steering wheel?

Thank in advance

Cheers
:)
 

Kaiser

Kaiser
Location
London uk
Ride
Vw golf mk5 tdi
Golf mk6 gti steering wheel

Hi I am new here, I was wondering if someone could help me here.I have a golf mk5 1.9 tdi.I recently bought a golf mk6 gti steering wheel which came with airbag and loom included and I retrofitted it however I can't use the horn and the button don't light up nor they function.my car has got midline cluster and my old steering wheel was a normal 4 spoke one.I am not planning to change my cluster to highline but just want the button to light up atleast even if not all of them would work.i already ordered a steering control module of a golf mk5 with mfs but haven't received it yet. I am confused as I don't know if I bought the right wheel control as some say that I should buy the wheel control module of a golf mk6.and how about slip ring is that a must. I read some links in the forum but I can't find the answers I am looking for. Can anyone help me plz?thanks in advance
 
Top