GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

ME & MY MKV Build! (Fun, Tough & Cost)

xSabretoothx

Fast w/ training wheels
Location
Raleigh, NC
Car(s)
2008 GTI
So I noticed that you have the ultra-racing bars, how did that skid plate mate up with all of that? I'm going with something a little different in my front now (used to have the ultraracing bracing), but was just curious on any fitment issues with all of that. Do you have any underside pics?
 

Mostic

Go Kart Champion
Location
Egypt
Car(s)
VW Scirocco
So I noticed that you have the ultra-racing bars, how did that skid plate mate up with all of that? I'm going with something a little different in my front now (used to have the ultraracing bracing), but was just curious on any fitment issues with all of that. Do you have any underside pics?

Sorry for the delay, I was very busy last days.
I have the two Ultra-Racing bars:
- Ultra-Racing Front Upper Strut / Tower Bar
- Ultra-Racing Rear Lower Strut / Tower Bar

And the ECS Skid Plate is in the Front Lower which I don't have any bar for it.
I purchased the Ultra-Racing Front Lower Strut Bar but I didn't install it because of the Whiteline Anti-lift Kit.

You can see it in the below pics

Front 01.JPG

Front 02.JPG

Here are the rear bar pics but this is before the KMD bars installation.

Rear 01.JPG

Rear 02.JPG
 

xSabretoothx

Fast w/ training wheels
Location
Raleigh, NC
Car(s)
2008 GTI
Gotcha, I remember that I had the same issue! I just installed the eurosport lower front with the USRT subframe brace and the turn in now is excellent! No fitment issues whatsoever.
 

xSabretoothx

Fast w/ training wheels
Location
Raleigh, NC
Car(s)
2008 GTI
Skid plates are for pansies!!
 

Mostic

Go Kart Champion
Location
Egypt
Car(s)
VW Scirocco
few updates

I was very busy last weeks and I had no time to update the thread and continue the story.

Few parts have been arrived from USP Motorsports.

  • Ferrea 2.0T FSI Valvetrain Kit- Stock Sized Valves
  • Valve Stem Seal Kit FSI/TSI
  • IE Valve Guide: 2.0T FSI Engines
  • Intake Camshaft: 2.0T FSI (06F109101J)
  • Exhaust Camshaft (06F109102E)
  • Cam Follower (Hydraulic Lifter)
  • Cylinder Head Gasket Set - VW/Audi 2.0T FSI
  • ARP Camshaft Girdle Bolt Kit: 2.0T FSI
  • ARP VW/Audi 2.0L (FSI) 4cyl Cam Tower Bolt Kit
  • IE 2.0T FSI Catch Can Kit (Requires IE Valve Cover)
  • IE 2.0T FSI Billet Valve Cover-ROW (IEBAVC5)
  • Valve Cover Gasket 2.0T FSI (06F103483D)
  • IE Rear Breather Blockoff Plate For Transverse 2.0T FSI/TSI Engines (IEBAVC8)
  • IE Evap Crossover Tube Relocation - 2.0T FSI (IEBAVC11)
  • EZ Oil Drain Valve Kit (EZ-106KT)
  • Oil and coolant lines and fittings (latest revision)
  • Calico Coated Rod Bearing Set for 4 Cylinder VW/Audi
  • Calico Coated Main Bearing Set - Audi/VW 4 Cylinder
  • Forge Turbo Hose Kit 2.0T FSI- Red
  • Forge Silicone Coolant Hose Kit 2.0TFSI- Red

I cancelled the IE Ultimate Crankshaft Girdle Kit as it will take few weeks to be ready.

Also, I got one item of my 2016 plan, I got 2011 Scirocco White/Black 1.4 TSI. I will install/swap another 2.0T FSI system on it (still looking for one), and after doing a full swap and make sure everything is working perfectly, I will install the upgrades I have in my Black MKV in the White Scirocco.
It is headache but let's see how it will end up!

more is coming :wink:
 

Mostic

Go Kart Champion
Location
Egypt
Car(s)
VW Scirocco
Yeah it is really interesting :wub: it was my dream since I got my MKV, I used the MKV as a demo and test before I plan for the Scirocco.

I am looking for another 2.0T FSI system in order to install it on the Rocco and make sure everything will function well then I will swap the performance parts/stuff from the MKV to it.

I am totally supporting you, Go for the Scirocco :thumbsup:
 

LilRaverBoi

Optometrist Prime
Location
Cedar Rapids, IA
New-style Sciroccos are not available here in the US :( You'd have to import from Canada or Europe....at least I think Canada got them.
 

Mostic

Go Kart Champion
Location
Egypt
Car(s)
VW Scirocco
New-style Sciroccos are not available here in the US :( You'd have to import from Canada or Europe....at least I think Canada got them.

It is not common in my country too but you can get it.

We don't get them either, although HPA Motorsports will sell you one for $150,000 with like 600hp

http://www.hpamotorsports.com/scirocco.html

This one for $150,000 is fully loaded and modified up to stage 5++
It is a bit expensive but I would go for it if I have that much money!
 
Top