dpham00
Modérateur Emeritus
- Location
- Los Angeles, CA
For comparison, I used the S3 engine (BHZ) and the Euro A3 200HP 2.0T (BWA). ETKA upd656 was used to compare the parts. Comparison is done for reference only, and you should always consult with your Audi and/or VW dealer for the latest information. This is by no means an inclusive list, as I tried to find some of the most important components only. Also, I manually compared the two, so please let me know if you find a mistake somewhere.
Some of the items that are the same between the BHZ and BWA:
Crankshaft
Intake and Exhaust Valves
Oil pump/Oil cooler
Ventilation for cylinder block including pcv and breather hoses
Water pump
Radiator
MAF
Throttle body
High pressure fuel pump
Clutch plate and pressure plate
Diverter valve (Same valve, but the S3 dv is located near the throttle body, the 200hp is located on the compressor housing)
n75
Some of the items that are different between the BHZ and BWA:
Flywheel
Connecting rods
Pistons
Timing belt kit
intake and exhaust camshafts
Fuel injectors
Turbocharger and exhaust manifold
FMIC
ECU
Look here for a list of Audi part #s
http://www.golfmkv.com/forums/showthread.php?t=28600
Some of the items that are the same between the BHZ and BWA:
Crankshaft
Intake and Exhaust Valves
Oil pump/Oil cooler
Ventilation for cylinder block including pcv and breather hoses
Water pump
Radiator
MAF
Throttle body
High pressure fuel pump
Clutch plate and pressure plate
Diverter valve (Same valve, but the S3 dv is located near the throttle body, the 200hp is located on the compressor housing)
n75
Some of the items that are different between the BHZ and BWA:
Flywheel
Connecting rods
Pistons
Timing belt kit
intake and exhaust camshafts
Fuel injectors
Turbocharger and exhaust manifold
FMIC
ECU
Look here for a list of Audi part #s
http://www.golfmkv.com/forums/showthread.php?t=28600