WyrdSquirrel
New member
- Location
- BC, Canada
- Car(s)
- 2007 GTI
So, I've been working on replacing the k03 turbo in my 07 VW GTI FSI 2.0, and I've come to a bit of a snag. I have the turbo out and apart, I'm replacing the entire cartridge but it doesn't want to seem to fit flush into the hot side. the little timing pin is aligned on both sides, but even after a few taps with a soft rubber mallet on the very top it doesn't wanna go. Looking for a bit of advice to getting it on there without damaging anything.