Eurocars build thread

[zrickety]

SpaceX?! Sounds like a good gig.

 

[eurocars]

Finally finished the passenger side loom. Still need to put pins on the end and fit it with the connector, but that will take a whole 10 min. Used the clips from the front core that hold the fog light harness to keep the harness tucked to the headlight. All loomed in techflex with a white tracer because I can't afford raychem or racewire sheathing. I used nutserts and polyethylene p-clips to hold it to the body. Drivers side is next

 

[high_octane3541]

Nicely done [emoji106]?

 

[eurocars]

Before and after wiring spaghetti monster. Stuff hanging in the drivers footwell will end up running to the engine, stuff on top of the dash support bar goes to the radio

 

[high_octane3541]

First pic hurts my head.

Kudos [emoji106]?

 

[drtechy]

First pic hurts my head.

Kudos [emoji106]?

I agree

posted via tapatalk

 

[soze]

How do you even make sense of spaghetti monster and figure out where to route things?

 

[eurocars]

Lots of labeling, untaping, temporarily zip tying stuff out of the way. Even though I've done it before, it was intimidating until I started getting into it and figuring out each section little by little

 

[das_fast]

sweet baby ray's

 

[eurocars]

sweet baby ray's

I'm finally almost out of the 3 1/2 bottles

 

[DerekH]

Second pic is incredibly satisfying.

 

[Das Gespenst]

Mad props man!

That first picture almost made my head asplode!

 

[LilRaverBoi]

Wow!!! That's one hell of an improvement! Looks very tidy now. Excellent work, as always!

 

[eurocars]

Sandblasted and rattle canned the subframe. Got the VWR subframe insert installed with my delrin bushings in the dogbone. Also picked up aluminum control arms and spindles for $125 shipped, so those should be arriving shortly

 

[xSabretoothx]

Very pretty!