penance
Fakinsupa
- Location
- BC West Coast
- Car(s)
- GTI
Alright, so I bought an LED kit to give me usable lights for those red reflectors we all have at the bottom of our door cards.
The only DIY's I could find mentioned plugging the +/- into PIN 18/19 of the 32 PIN door controller harness. http://www.uspmotorsports.com/RFB-LED-Puddle-Light-Kit.html
This doesn't work for me..
I've done the VAGCOM +64 for both doors.
One comment said some GEN controllers you end up using a combination of PIN 1/19 or 1/2. I've tried 1/19, but PIN 2 is already occupied.
Anyone done this mod before, and know what PIN combination actually works? Or if there is some unmentioned extra step?
I've done a bit of searching, come up with nothing yet. Posting to see if anyone out there has been in my place, or just knows what works.
Control module is 1K0959793J... if that helps any.
Cheers :help:
The only DIY's I could find mentioned plugging the +/- into PIN 18/19 of the 32 PIN door controller harness. http://www.uspmotorsports.com/RFB-LED-Puddle-Light-Kit.html
This doesn't work for me..
I've done the VAGCOM +64 for both doors.
One comment said some GEN controllers you end up using a combination of PIN 1/19 or 1/2. I've tried 1/19, but PIN 2 is already occupied.
Anyone done this mod before, and know what PIN combination actually works? Or if there is some unmentioned extra step?
I've done a bit of searching, come up with nothing yet. Posting to see if anyone out there has been in my place, or just knows what works.
Control module is 1K0959793J... if that helps any.
Cheers :help: