GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

CECM and Bi-Xenon Upgrade/Issues

gothboy297

New member
Location
New Zealand
Car(s)
Golf mk5 2.0 TDI BKD
Hi all,

I am new here and come with some issues.

I recently installed bi-xenon headlights into my 2.0 TDI. It came with a midline CECM (1k0937049s). Both lights worked perfectly but I had the warning light illuminate on the dash. In order to extinguish it I bought a highline CECM (1k0937049n). Upon installation of the new CECM the driver's xenon stopped turning on. I switched back to the old CECM and everything worked fine.

I have tried numerous variations of coding on vcds ie with shutters, without, disabling xenon highbeams etc.

I have ensured all connections are seated correctly (and the lights work with the old CECM).

My thoughts are that the only variable is the new CECM so it may be broken. Interested to hear from experts as I am far from it. Is there something I am missing?,

Thanks in advance for any help. Let me know if I have posted this in the wrong section I am new to this.
 

GTI's

Drag Race Newbie
Location
MD
Seems like the new module is not sending power out to Pin 6 on the drivers side.
 
Top