Search results

Long story short, I found these Passat 4-Motion calipers through an online junkyard and decided it was too good of a deal to pass up on. Anyway, the calipers only have 18k miles on them and everything seemed to be in excellent shape upon arrival. Well yesterday, I finally had a little time to...

Pretty much as the title states, just wondering if the MKV FWD TyrolSport caliper pin kit is a direct swap over to the MKV R32 brake set-up? I'm guessing they are slightly different seeing as TyrolSport offers different links for each on their website, but I just wanted to confirm. Dan or...

SOLD As the title states, I have a brand new 034 Motorsports dogbone mount insert. This insert is the street density rubber...60 durometer solid bushing (approximately 35% stiffer than stock). I purchased this from another member; however, decided to just keep the OEM mount and refresh it...

As the title states, looking for a OEM XM satellite tuner in good condition. Doesn't matter if the three month subscription has been used or not. The unit has to be compatible with the factory MFD2 navigation system and TPMS and needs to have both the brown and green plug connections.

Sorry for the delay on the picture detailing the comparison between the OEM endlink and these. As you can see, the custom DIY endlink is just a hair larger in diameter; however, without the stress from preloading the sway bar, these endlinks have held up remarkably well thus far. All four ball...

Great thread! I wish I had done something similar when I began upgrading and moving through stages. Well done sir! :thumbsup: With APR's K04 file, they control boost before 4k RPM to help eliminate compressor surge due to the torque/boost spikes at low RPM (see circled part of K04 dyno...

I know this is a long shot, but I figured I would see if anyone out there wanted to trade their BFI stage II side engine mount for my VF Engineering side engine mount? Mine currently has ~21k miles on it and is still in pristine condition (just needs a quick cleaning). I would be looking for a...

Can anyone with an extra breather hose or valve cover inform me of the hose diameter needed to connect these two pieces together? Ever since my k04 install, this hose has been just a hair too short for my liking and I figured I would go ahead and grab a slightly longer replacment. Any help is...

As the title states, I need a set of rear coilover spring perches ASAP. I just installed another set of coilovers and for the second time in as many brands, I need the rear to be raised more than the current perches allow. From what I remember, the rear Koni perches allow for quite a bit of...

I know this piece has been covered a couple of times, but I haven't seen anyone report back on the mount after extended periods of time. So, I realize that a new engine mount is going to create vibration (my BFI stage II transmission insert was nuts at first), but after time everything usually...

SOLD As the title states, I have a brand new PowerFlex FSI torque arm insert (dogbone insert) for sale. As you can see from the pics, this insert actually fills in more of the OEM rubber insert (found in the subframe) than every other insert on the market (except for the 034 complete bushing...

Thoughts? I really enjoyed the first two...the original a little more than the sequal. I'm really intrigued to see what the motion picture is all about, too. Anyone else here a Bioshock fan?

Definitely a boost leak...everything else looks okay. Your timing advance should improve slightly once the leak is fixed and the ECU isn't maxing out the turbo to meet the requested values. FYI, overall timing advance is based on the secondary y-axis on graph 2.

Technically, if you were to implement a shorter endlink on a coilover strut with the OEM mounting location, you would inherently worsen this issue. Take a look at this pic below... This is a very crude example with on the OEM suspension, but it will depict the explanation. The red line...

All parts can be found at www.MidwestControl.com. I found the MWC website through another car forum where members built their own adjustable endlinks with good success (would post the link, but I haven't been able to find it). Thus, I decided to see how/if a similar endlink design for our cars...

SOLD As the title states, I have a Black Forest Industries stage I transmission mount insert for sale. The insert is 65 duro and perfect for a DD that needs a little upgrade, but doesn't want any added cabin noise/vibrations. The mount has been used for approximately 15k miles, but still...

SOLD I have a used VF Engineering Lower Rear Engine (aka Dogbone) mount with brand new poly insert and bolts. The billet mount has been used for approximately 20k miles; however, as mentioned before, the poly and bolts are both brand new from VF. This does NOT include the larger poly dogbone...

Well, I'm kind of a suspension noob, so I was hoping that some of the more insightful people on here could provide a little assistance. First, can someone explain the optimum orientation of how the front sway bar should sit with the suspension under load? I've read that the end link...

I searched and found a couple of older threads listing these without any SOLD notification. Just wanted to see if anyone was selling a slightly used (yet in good condition) or BNIB set? TIA.:thumbsup:

Just wanted to give you guys a heads up on these...good deal from TireRack 18" (225/40/18) http://www.tirerack.com/tires/tires.jsp?tireMake=Kumho&tireModel=Ecsta+SPT&partnum=24YR8KU31XLOLD&vehicleSearch=false&fromCompare1=yes 19" (235/35/19...I know it's a little wider than what most of you...