GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Search results

  1. gti2slow

    MFD replacement options

    It looks like my MFD is starting to go, every now and then I will have a dead line of pixels or a corner get dim. Ive been searching the forums for a OEM+/Upgraded MFD. Is there anything that is plug and play simple?
  2. gti2slow

    Trunk seal replacement

    Some doofus loaded a large box into the back of my car and ripped up the hatch seal. I have a replacement but it looks like the original is glued in? Anyone replace theirs? What did you use to stick it back on?
  3. gti2slow

    Driver Motorsport no more?

    Seems like their never updated website and social media are AWOL. Any news on if the company is really gone and if Bronson is still tuning?
  4. gti2slow

    CRC GDI cleaner

    I've used CRC GDI stuff as well as Seafoam annually using a spray nozzle through the IAT port. I have had good results when done on an engine at operating temperature and with a heatsoak. I have not saved any borescope shots after my last cleaning but this dudes video really is similar to my...
  5. gti2slow

    Vibration on deceleration after installing poly engine mounts.

    I have BFI stage 1 engine and trans mounts and a ECS dogbone insert. I noticed that sometimes while decelerating that I will have harsh vibrations while passing through the 3,000 rpm range, this is from the engine as as soon as I engage the clutch or gas it instantly goes away. Is this normal...
  6. gti2slow

    Forge silicon throttle body hose

    Anyone use one? How is fitment? My stock hose is looking pretty beat and it's time for a new one. Any recommendation for what clamps to use?
  7. gti2slow

    Dies after 4K RPM: P0321 - Engine Speed Sensor (G28)

    My car has been sitting for a few weeks. I decided to drive it today, everything was normal until I opened it up on a nice stretch of highway. The car completely died after 4K RPM. Like the tach dropped to zero and the engine was completely dead, it sputtered and misfired for a second and...
  8. gti2slow

    VWR 'Cup Edition' anti lift bushings

    Has anyone used these? https://www.ecstuning.com/b-racingline-parts/vwr-front-suspension-bush-kit-golf-5-6/vwr44g500~vwr/ There is not a ton of info out there on these, they may be rebranded SuperPro but I really cant confirm anything.
  9. gti2slow

    Horn sounds weird only during the lock chirp

    Pulling my car out of hibernation, it may be me not hearing it in a while but chirp noise when I lock the doors sounds off. Its loud, just sounds weird The horn when I press the center of the steering sounds right. Anyone ever have this issue or am I confused.
  10. gti2slow

    Transmission gear oil reccomendation

    Been running Motul Gear 300 since my LSD install and shifting is buttery smooth EXCEPT for the first 1-2 shift when the temperature is below 40F is not good at all, its a little crunchy until it warms up. Should I go with OEM or is there a good blend that works?
  11. gti2slow

    Looking at a 2008 rabbit, what problems should I check for?

    Im a little clueless when it comes to the Rabbits. From what I can tell the 2.5 is a really reliable motor. Found a crazy deal locally on a 08 rabbit with a manual transmission. It has about 130K miles and an unknown service history. Should I look at anything specific?
  12. gti2slow

    FSI cam chain tensioner

    I haven't been able to get a clear answer on this. Is there a recommended replacement interval/mileage for the chain and/or tensioner for the FSI?
  13. gti2slow

    H&R 28F/24R swaybars

    Does anyone have the H&R 28/24mm swaybar combo? How is handling? Do these keep things neutral or understeer or are these going to be setup to over steer pretty hard to help get the car rotating for auto-x? Would it be better to go with one of the softer bars in the front and/or rear?
  14. gti2slow

    Non race car engine mount recommendation

    I have been looking at a new set of motor mounts. I was looking at the 034 street density mounts as well as their billet mounts. I would like to go rubber over poly mounts. Can anyone recommend a good set of mounts?
  15. gti2slow

    FS: 17z/18z caliper bolts

    New set of RotorLab bolts to mount 17z or 18z calipers. I used the set of bolts that came with my rotors from RB instead. These are pretty nice: http://rotorlab.com/bolt-kit $35 shipped, I take paypal.
  16. gti2slow

    Loose windshield cowl

    Years ago I had what I thought was a reputable shop install the coil-overs on my car, turns out they were total hacks but that has been corrected. I've had a problem with the cowl ever since. Its still flush with the windshield and appears un-cracked, but the lower edge thats in the engine...
  17. gti2slow

    Vac pump rebuild or replace

    I noticed a pretty good grime buildup around and under the vac pump. I think the seal has perished, should I get a rebuild kit or just replace the whole pump?
  18. gti2slow

    What Golfs came with stamped front lower control arms?

    I saw there are three kinds of LCA for, stamped steel, cast steel, and cast aluminum. From what I can tall most GTI's have cast steel, but some came with stamped steel ones. Is there any model year or specific version that came with the stamped steel arms?
  19. gti2slow

    Engine bay cleaning, transmission

    My engine and most of the upper bay is pretty clean. My trans seems to be covered in grime. Was curious if anyone has cleaned their bay before and what process they used. I want to foam the transmission case with Simple green extreme (Blue bottle, aluminum safe) and either rinse with a hose...
  20. gti2slow

    A/C schrader valve leaking

    Noticed my A/C was super weak compared to the normal weakness. I was hooking up my manifold gauge set and noticed my low side valve was filled with dye and saw bubbleing at the bottom of the port. Are these just standard schrader valves? I had a difficult time locating some for a BMW and have...
Top