GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Search results

  1. Mostic

    My second build on my 08 GTI

    I am really sad for you my friend. This project was expected to be one of the best when started it. but I suggest that you don’t give up, I consider it my toy so I enjoy it even when it has serious issues. Some times I challenge myself to have enough power to work on it.
  2. Mostic

    ME & MY MKV Build! (Fun, Tough & Cost)

    My friend who is my mechanic too who takes care of the wiring job and as far as I understand it is a DQ500 straight forward. It is an expensive modification but I am expecting it will be day and night different ..
  3. Mostic

    ME & MY MKV Build! (Fun, Tough & Cost)

    Hi, I was busy the last few months planning for the next upgrade step, and I did it! DQ500, and Nortech G30-900 0.61A/R are completely installed yesterday. I am in the phase of checking the oil, air, etc leaks now; so, I will drive the car for a few days then will back again to the workshop to...
  4. Mostic

    The Official Unofficial FAQ for Big Turbo FSI owners Pt2

    Hi, Which DV are you using for the big turbos? GTX3076R Gen2 and above. Thx
  5. Mostic

    ME & MY MKV Build! (Fun, Tough & Cost)

    I will try to return back the APR spring and see if this issue will be fixed. I hope that the intake camshaft is still okay and not impacted due to this fuel cut and engine brake.
  6. Mostic

    ME & MY MKV Build! (Fun, Tough & Cost)

    This fault appears after installing the iABED TSi Cam Follower Roller Conversion. I tried to install it without replacing the APR HPFP Spring but the car was misfiring then I installed the spring comes with the kit and the car started giving engine brake in the redline (the car stop by itself...
  7. Mostic

    How to add this forum group to tapatalk?

    Hi, After the forums upgrade, I can't access it or MK6 from the Tapatalk! Does anyone succeed to do it? If not then how to add this forum group to tapatalk? Thanks Mostic
  8. Mostic

    Big Turbo Fueling Setups / Solutions

    I don't have enough info about the APR or GIAC LPFP solutions but I remember that I read somewhere that the APR LPFP starts from 3bar in order to guarantee that the LPFP won't go lower than 3bar and it works over CAN not using boost connection like USP, CTS kits. I hope that someone here can...
  9. Mostic

    Big Turbo Fueling Setups / Solutions

    I used the DW65v with the PM3 with the FWD & AWD +K04 setup and it was working well. After installing again the EFR7163 turbozentrum kit I had a drop in the low pressure fueling, so I replaced the DW65v LPFP by BAR-TEK 700hp LPFP and it works very good till now with the PM3. The minimum reaches...
  10. Mostic

    My second build on my 08 GTI

    I am happy that you resume the project. I just resumed mine few days ago and lets see who they will be :)
  11. Mostic

    My second build on my 08 GTI

    Very good that you will keep the car.
  12. Mostic

    My second build on my 08 GTI

    I am really sorry for that. I believe you need to find a good workshop to check your car, don't know if Arnold PagParts is close to you or not. Try to contact him so even if he isn't close to you, he may recommend someone to you. What heat range plugs you were using?
  13. Mostic

    WTB: PM3

    Hi, If any PM3 for sale please send me PM or reply to the thread. Thanks Mostic
  14. Mostic

    WTB: 3" downpipe for K04 OEM fitting

    Guys, Anyone want to sell a down pipe? I just need it without the midpipe similar to this one.
  15. Mostic

    WTB: 3" downpipe for K04 OEM fitting

    I want to buy 3" downpipe for K04; I prefer APR or milltek, similar quality
  16. Mostic

    Big Turbo Fueling Setups / Solutions

    LPFP pressure problem Still having problem with my DW65v, it happen once the car is parked for long time or few days. Today the car didn't start from the first time and it failed to start then I tried another time and it started after while! The tank is almost 1/4 full and I mainly face this...
  17. Mostic

    Why Oil Temp is not reading after changing the ECU?!

    Guys, I have a strange question, why oil temp is not reading after changing the ECU SW? The oil temp disappear from the MFD and it gives -60 in the PolarFIS which means it is not reading. This thing happen when I change the SW revision from 1K0 907 115 Q to 1K0 907 115 R :mad0259: This is...
  18. Mostic

    Question: Eibach or H&R springs?

    Eibach or H&R springs? Which one you would go for? Why? I have an offer to install Eibach or H&R springs on my car. The car is highly modified and I will replace the Blue Koni springs I have by one of the Eibach or H&R springs. What do you think? Thx
  19. Mostic

    ME & MY MKV Build! (Fun, Tough & Cost)

    Painting update Few pics received from my friend during the painting process: Expected to paint the first layer tomorrow :bow:
Top