DV52's latest activity

OK - bummer!!!! As I said "I've not personally tried this tweak". HERE is a post from someone that made this change - so apparently the...

Interesting. I thought it was only for the feature that provides full braking power if you press the brake pedal fast and firmly. I...

@MopedMan: Maybe read THIS Don

@Serpher. OK - I normally start my reply to these sort of matters with a statement of the obvious (but it's worth saying nevertheless...

@MopedMan: Hi. I've not personally done this project - but I understand ALL the matters listed in your "few things to point out here"...

@Serpher: Hi. While @YamR1rider advice is correct - your observation regarding the Brake function at slow-speed/reverse could be caused...

Tristan: Hi. For obvious reasons related in the main to the fact that I live in the very, very deep south, I'm really not sure what is...

Finally activated the fog lights, works like a charm with the new switch!

@baldybouncer: hmm....... I'm not sure that I entirely understand your bolded question about "upload". If you want to show the forum...

@baldybouncer- : Hi. Alas, replacing a MIB2 into a mk7 is NOT plug-and-play!!! ;) hmm........ so, let's get back to basics! The MIB in...

hmm.......... do this: Fire-up the VCDS software and connect the VCDS dongle to the car Select Auto-Scan from the screen below: ...

OK - thanks for the photos (the headlight connector is the standard 14 x pin version). What version diagnostic device are you using and...

Yes, it is "interesting".!! As I have said - the reason for the 10th pin on non-OEM rotary light switches is because of the...

Not good!! There seems to be NO PR code related to the headlights on the sticker in your picture!! Very strange - not sure if Brazil...

The PR codes are shown on the data sticker - here's an example of a data sticker for a MY15 Golf TDI. The PR code series for...