Dinan E53
Ready to race!
- Location
- Mountain House, Ca.
- Car(s)
- 08 R32
Can these cams fit the new R32 http://www.techtonicstuning.com/showcategories.asp?catid=29
V
R32 Cams
- Thread starter Dinan E53
- Start date
The part number 109.592 on their website will work well in the motor and not affect the DSG in the slightest. There is a slight drop in low end torque but they really help on the big end... the torque gains are moved up in the RPM range which will shorten the power band, but this is not an issue due to the 6-speed gear ratios. and the peak is much better. Best thing is if you go Forced Induction later the duration is small enough that they will help performance there as well.
i would stay away from anything in the 272 degree or higher durations for a street car.
From their site:
109.592
VR6 264/260 cam set for all 24v 2.8-3.2 variable cam timing engines, Golf/Jetta IV, R32 and Audi tt 3.2, Steel Billet, 23hp gains, 16 ft/lb torque gains.
i would stay away from anything in the 272 degree or higher durations for a street car.
From their site:
109.592
VR6 264/260 cam set for all 24v 2.8-3.2 variable cam timing engines, Golf/Jetta IV, R32 and Audi tt 3.2, Steel Billet, 23hp gains, 16 ft/lb torque gains.