markcaughey
Ready to race!
- Location
- Glasgow
Basically as the title says
Removed the tails todo this but I found it easier to mask the circles out while still on the car. I have applied the tint by adding 2 pack black to some laquer, just start with a little and work your way up to get to the level of darkness you desire. Also remember to give all 4 parts of the tail lights the same number of coats from the same mix ( laquer:2 pack) to keep the colour match the same. At the moment I have just applied the tint but once that is dry I will flatten with p1500 wet grey scotch brite and then apply clear coat over the full light this will remove the edge caused by the tape.
Removed the tails todo this but I found it easier to mask the circles out while still on the car. I have applied the tint by adding 2 pack black to some laquer, just start with a little and work your way up to get to the level of darkness you desire. Also remember to give all 4 parts of the tail lights the same number of coats from the same mix ( laquer:2 pack) to keep the colour match the same. At the moment I have just applied the tint but once that is dry I will flatten with p1500 wet grey scotch brite and then apply clear coat over the full light this will remove the edge caused by the tape.
Attachments
-
image.jpg
