V
Boot opening
- Thread starter veedubgee
- Start date
JetTurbo
geezer
- Location
- South Florida, USA
- Car(s)
- 2018 GTi Autobahn 6M
46 - Central Convenience enable Byte 2 Bit 3
siliconcenturion
Go Kart Champion
- Location
- Norcal, 94043
thats not enough on its own - you need new springs to pop it open
JetTurbo
geezer
- Location
- South Florida, USA
- Car(s)
- 2018 GTi Autobahn 6M
VCDS - changing undocumented settings
Comfort System Central Control Module J393 (VCDS 46-Central Conv.) - byte 2
Ross-Tech took away the simple checkbox for any undocumented setting,
and the Golf hatch release on bit 3 is undocumented.
You need to work out the bit mask and enter in binary, hex or decimal to change the setting.
Here is how ... Using the Long Coding Helper when checkboxes are not present
Comfort System Central Control Module J393 (VCDS 46-Central Conv.) - byte 2
Ross-Tech took away the simple checkbox for any undocumented setting,
and the Golf hatch release on bit 3 is undocumented.
You need to work out the bit mask and enter in binary, hex or decimal to change the setting.
Here is how ... Using the Long Coding Helper when checkboxes are not present
TablaRasa
Ready to race!
- Location
- Exit 136 NJ GSP
Comfort System Central Control Module J393 (VCDS 46-Central Conv.) - byte 2
Ross-Tech took away the simple checkbox for any undocumented setting,
and the Golf hatch release on bit 3 is undocumented.
You need to work out the bit mask and enter in binary, hex or decimal to change the setting.
Here is how ... Using the Long Coding Helper when checkboxes are not present
Actually the new version of vagcom has bit 3 again....I just did this last week and I have the latest version of vagcom