Richard210
New member
- Location
- San Antonio TX
I had the same problem and I fixed it we silicone. Removing the bumper is easy but putting it back on was a little tricky for me. But once I had my bumper off I had a small dent over the right vent. To be honest it looked like it was made like that the paint wasn't cracked from bending and there was no scratches from something hitting it. Well anyways I just put silicone where the gap was and put some all around the vent just to make sure let it dry and put everything back together. Then I tested to see if it still let water in my pouring water on top of the car with the water hose then checked to hatch compartment and there was no water so problem solved