ModdedEuros
Go Kart Champion
- Location
- PA
Modded Euros is pleased to announce we now carry Eurojet exhausts and downpipes. These modular systems mean you can pick and choose which components fit your needs and your budget. No cutting, welding or custom parts needed. Just swap and go.
Eurojet 3" Modular V-band Downpipe EJ551-E10-01-01
- Available with or without a Cat
- Brushed T304 stainless steel, offering more corrosion resistance than any other stainless steel
- 3" diameter to reduce back pressure and increase pass-through
- Material wall thickness of 0.065" to reduce cabin noise
- Hand-welded joints that are inspected for proper welding penetration and durability
- Internal expansion joints and superior sound-absorbing material to create 40% pass-through, up from 30% in previous-generation systems
- Laser-cut stainless steel flanges to improve fitment and alignment
- Inlet/outlet is centered in the mid-muffler for even temperatures, less turbulence, and a more equal sound
- Reinforced corrugated inner tubing within flex section for long-term durability
- Three O2 sensor bungs for universal installation
- OEM reducer section from 3" to 55 mm to allow fitment of downpipe to OEM exhaust
More info:
http://www.moddedeuros.com/products/eurojet-3-modular-v-band-down-pipe-ej551-e10-01-01
----------------------------------------------------------------------
Eurojet 3" V-Band Cat-Back Exhaust EJ511-E20-01-01
- 0.065” material thickness to prevent the system from deforming over years of expansion and contraction
- Self-aligning, fully V-banded modular system that allows you to build your system over time or modify it quickly for track use Male/female flange design that eliminates exhaust leaks and condensation sweat
- Thick tubing and rear muffler designed to stabilize the long sound waves and reduce cabin drone
- High-grade T304 stainless steel with brushed matte finish for ultimate durability and aggressive race look
- Hand-welded joints for longer lasting durability and an improved custom appearance
- Internal expansion joints and superior sound-absorbing material to create 40% pass-through, up from 30% in previous-generation systems, and a clean European exhaust sound
- Laser-cut stainless steel flanges Inlet/outlet is centered in the mid-muffler for even temperatures, less, and a more equal sound
- Corrugated inner tubing within flex section
- Three O2 sensor bungs
- OEM reducer section from 3" to 55 mm to allow fitment of downpipe to OEM exhaust
More info:
http://www.moddedeuros.com/products/eurojet-3-v-band-cat-back-exhaust-mk5-gti
--------------------------------------------------------------------
Eurojet OEM Fitment FMIC Kit EJ551-M10-01-00
Cast aluminum endtanks
Bar and plate core design
Efficient chamber balance
Proprietary internal louvers and fin design
TIG-welded tanks
More info:
http://www.moddedeuros.com/products/eurojet-oem-fitment-fmic-kit-mk5-mk6-2-0t
Eurojet 3" Modular V-band Downpipe EJ551-E10-01-01
- Available with or without a Cat
- Brushed T304 stainless steel, offering more corrosion resistance than any other stainless steel
- 3" diameter to reduce back pressure and increase pass-through
- Material wall thickness of 0.065" to reduce cabin noise
- Hand-welded joints that are inspected for proper welding penetration and durability
- Internal expansion joints and superior sound-absorbing material to create 40% pass-through, up from 30% in previous-generation systems
- Laser-cut stainless steel flanges to improve fitment and alignment
- Inlet/outlet is centered in the mid-muffler for even temperatures, less turbulence, and a more equal sound
- Reinforced corrugated inner tubing within flex section for long-term durability
- Three O2 sensor bungs for universal installation
- OEM reducer section from 3" to 55 mm to allow fitment of downpipe to OEM exhaust
More info:
http://www.moddedeuros.com/products/eurojet-3-modular-v-band-down-pipe-ej551-e10-01-01
----------------------------------------------------------------------
Eurojet 3" V-Band Cat-Back Exhaust EJ511-E20-01-01
- 0.065” material thickness to prevent the system from deforming over years of expansion and contraction
- Self-aligning, fully V-banded modular system that allows you to build your system over time or modify it quickly for track use Male/female flange design that eliminates exhaust leaks and condensation sweat
- Thick tubing and rear muffler designed to stabilize the long sound waves and reduce cabin drone
- High-grade T304 stainless steel with brushed matte finish for ultimate durability and aggressive race look
- Hand-welded joints for longer lasting durability and an improved custom appearance
- Internal expansion joints and superior sound-absorbing material to create 40% pass-through, up from 30% in previous-generation systems, and a clean European exhaust sound
- Laser-cut stainless steel flanges Inlet/outlet is centered in the mid-muffler for even temperatures, less, and a more equal sound
- Corrugated inner tubing within flex section
- Three O2 sensor bungs
- OEM reducer section from 3" to 55 mm to allow fitment of downpipe to OEM exhaust
More info:
http://www.moddedeuros.com/products/eurojet-3-v-band-cat-back-exhaust-mk5-gti
--------------------------------------------------------------------
Eurojet OEM Fitment FMIC Kit EJ551-M10-01-00
Cast aluminum endtanks
Bar and plate core design
Efficient chamber balance
Proprietary internal louvers and fin design
TIG-welded tanks
More info:
http://www.moddedeuros.com/products/eurojet-oem-fitment-fmic-kit-mk5-mk6-2-0t