simonds1
New member
- Location
- Pembrokeshire
Hi guys, I'm really hoping somebody can help me here. Basically, I retro-fitted an RNS510 to my 2007 Golf Mk5 GT TDI a few years ago and always used to just load my music onto the hard drive. Then I got into Spotify so started looking into Bluetooth options. It seemed to me that a 9w7 bluetooth module was the best option, but at a costly £300-ish, I decided to give it a miss and just get an AUX cable to connect to the headphones socket on my phone. Tidy job. However, the headphones socket on my phone stopped working last week :frown: So I decided to look into Bluetooth options again and found this....
http://www.ebay.co.uk/itm/Yatour-Bl...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
This seemed like a really good option to me and as it was only £60 I thought I'd give it a go. It arrived today...
...and I've been trying to set it up and I'm a bit stuck. Basically, it plugs into the same 12-pin location on the back of the RNS510 that my old AUX cable used to, but this bluetooth unit is meant to behave like a CD Changer and use the CD Changer controls etc. This is the problem though - How do I access CD Changer controls on my RNS510? Do I need to use VCDS to code it and tell it I have a CD Changer, or should the controls just come up on the screen when I plug one in? The bluetooth unit uses CD01 controls to stream bluetooth music, but it also has a 3.5mm AUX in that you can acces by changing to CD02 on the RNS510. I cannot get to any screen that will let me change CDs though? :iono: This is the top of my RNS510 if it helps at all. I'm guessing from the sticker it's a version B?...
The Yatour Bluetooth adapter isn't compatible with 2011 onwards RNS510 units, but there's a sticker on the side of mine saying it was manufactured in May 2010 so it should be compatible.
Any help would be hugely appreciated and I'd also be interested to know if anyone else has got one of these Yatour Bluetooth adapters and how they got on with them?
Cheers guys :biggrin:
http://www.ebay.co.uk/itm/Yatour-Bl...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
This seemed like a really good option to me and as it was only £60 I thought I'd give it a go. It arrived today...
...and I've been trying to set it up and I'm a bit stuck. Basically, it plugs into the same 12-pin location on the back of the RNS510 that my old AUX cable used to, but this bluetooth unit is meant to behave like a CD Changer and use the CD Changer controls etc. This is the problem though - How do I access CD Changer controls on my RNS510? Do I need to use VCDS to code it and tell it I have a CD Changer, or should the controls just come up on the screen when I plug one in? The bluetooth unit uses CD01 controls to stream bluetooth music, but it also has a 3.5mm AUX in that you can acces by changing to CD02 on the RNS510. I cannot get to any screen that will let me change CDs though? :iono: This is the top of my RNS510 if it helps at all. I'm guessing from the sticker it's a version B?...
The Yatour Bluetooth adapter isn't compatible with 2011 onwards RNS510 units, but there's a sticker on the side of mine saying it was manufactured in May 2010 so it should be compatible.
Any help would be hugely appreciated and I'd also be interested to know if anyone else has got one of these Yatour Bluetooth adapters and how they got on with them?
Cheers guys :biggrin: