New Schwaben Fender Roller! *$59.95* with Free Shipping!

New Schwaben Fender Roller! $59.95* with Free Shipping!

This professional-grade fender roller allows you to gently and gradually flatten your inner fender lips in order to increase your fender to tire clearance.



This is the perfect tool for:

If you want to lower your vehicle
If you want wider-than-stock wheels
If you are going to use wheel spacers or decreased offset
By rolling the fender lip flat, you can lower your car further, and give your car a wider stance, without your tires rubbing on the inside of the fender.

Fully adjustable for use on vehicles of different ride heights, offsets, and wheel bolt patterns. Fits 4 and 5 lug hubs with up to 120.6mm (4.75") bolt patterns.




Click HERE for your Schwaben Fender Roller!


After you get yours make sure to post you in-use as well as before and after images here!




*price subject to change

"Fits up to 13mm wheel studs/bolts. Holes will need to be enlarged to fit vehicles with 14mm wheel studs/bolts."

AKA will need to be modified to work on any MK4/5/6/7

eurocars said:

"Fits up to 13mm wheel studs/bolts. Holes will need to be enlarged to fit vehicles with 14mm wheel studs/bolts."

AKA will need to be modified to work on any MK4/5/6/7

Click to expand...

MK4/5/6/7 run M14x1.5 wheel bolts, with a 5x112 bolt patters typically the tool will require mild modification. Now that being said my personal experience with it on an MK6 I did not have to modify the tool but running the wheel bolts in did strip the powder coat from the openings, the powder coat is very thick, you're basically "cutting" it off the openings.

-James

When you roll roll with Schwaben.

Roll Roll Roll your fenders, roll them really smooth..........

back in stock!!!!!

back in stock!