DODO101
Ready to race!
- Location
- Asheville, NC
- Car(s)
- MKV 2006 GTI MT
I was thinking of installing a light bar behind the front, but couldn't find any DIY for the MKV.
We had to drill the bumper, use two 90° bracket (about $5 each) - cut it to size, ran the wire to the relay which is attached to the ground. Route the control wire under the battery and through the firewall all the way to the center console. The switch is next to the ESP button, tapped 12 volts from the cigarette lighter, I have a simple toggle switch for now, but planning to install a push on/off with led indicator.
It's hard to take pictures of the actual light, but it is bright! The flood is definitely helps on dark bar roads.
Here's a few pictures to help whoever wants to do it.
Enjoy!
We had to drill the bumper, use two 90° bracket (about $5 each) - cut it to size, ran the wire to the relay which is attached to the ground. Route the control wire under the battery and through the firewall all the way to the center console. The switch is next to the ESP button, tapped 12 volts from the cigarette lighter, I have a simple toggle switch for now, but planning to install a push on/off with led indicator.
It's hard to take pictures of the actual light, but it is bright! The flood is definitely helps on dark bar roads.
Here's a few pictures to help whoever wants to do it.
Enjoy!