markthomas1969
#4128
- Location
- Dallas, Texas
Just wanted to see the guts!
V
Anybody have a cut away drawing of an R32 engine?
- Thread starter markthomas1969
- Start date
redGTI
Axis Motoring
- Location
- Orlando, FL
- Car(s)
- 02 & 08 GTI, 08 M3
This is a 2.8 VR6 24 valve. Close enough.
redGTI
Axis Motoring
- Location
- Orlando, FL
- Car(s)
- 02 & 08 GTI, 08 M3
mrtall815
panda bear in progress
- Location
- ohio for school, orlando for summer
- Car(s)
- r32
Google images is your friend....
ivan whats up with cflmkv?
markthomas1969
#4128
- Location
- Dallas, Texas
Thanx kindly!
NiagaraJCS
New member
- Location
- King George, VA
- Car(s)
- 08 R32 # 3658
I thought I saw a hole thread on the VR6 engine. Lots of pics and part discriptions, can not remember where?
Mr. Perkins
Suck it Trebek
- Location
- ATX
Here's some pics. They come from a document put out by VW called "VW 3.2 and 3.6 liter FSI Engine Self-Study Program". It is available for sale from Bentley Publishers for $29.
Block cutaway
Head overview
Intake manifold cutaway
3.6 VR6 FSI cutaway
Block cutaway
Head overview
Intake manifold cutaway
3.6 VR6 FSI cutaway
You don't need to pay for "VW 3.2 and 3.6 liter FSI Engine Self-Study Program" and there are allot more images, including the one like you want. Below is a link to a free PDF of the whole thing!
http://www.usr32registry.org/downloads/vw_vr6_self_study.pdf
http://www.usr32registry.org/downloads/vw_vr6_self_study.pdf
Mr. Perkins
Suck it Trebek
- Location
- ATX
Thanks for linking to that document and completely disregarding the notice I put directly under that link...
Please do not link directly to any of the above documents, images, or otherwise.
Did it ever occur to you that I purposely did not link directly to that document or the fact that since that document costs money (which I clearly pointed out) that maybe linking to it would be a bad idea?
Note: the document has been removed
WOW settle down Nancy! I removed the post with the link to the doc.
On a side note, don't go and put on your dress because I found a doc that YOU are illegally hosting. Do you actually expect people to research and find who is hosing a PDF and then cross reference against forum users after speculating the details about the host's licensing rights to the PDF? Of course not, the PDF was relevant to the topic so I linked it. If you want to host something then host it and take the risk, if you don't then shut up. Either way it's not my problem.
Mr. Perkins
Suck it Trebek
- Location
- ATX
OK so I overreacted a little bit, but you still disregarded my request at the bottom of that page (it's OK, I know people hardly read anything on a webpage). Maybe you didn't realize that in my post above I mentioned the document and then in my sig there was a link to the registry site for people to "discover" on their own. Maybe you missed the thread 2 days ago where somebody was asking for this very document and I advised them that although they could purchase the document, it was also available for free if he was willing to do a little searching around on his own.
Either way, your post was the straw that broke the camels back and made me realize I shouldn't be hosting those documents. I shouldn't have freaked out directly at you.
Fair enough, truce. You are also right about not reading every line, if I had noticed the request to not link I would have held back. Hope you didn't get in any hot water.