Hello everyone
I own a 2006 mk5 gti that is modified. I've been having this issue lately of my car not starting after it has warmed up. I can drive around for as long as I want with no issues but as soon as I turn the engine off it won't start. The first attempt of trying to turn the car when it's hot it would turn on, idle for about 2 seconds and then stall and then all other attempts after that it will just crank without turning on. The only way it would start when its hot is when i remove the g410 sensor. PLEASE HELP!
Things I ve changed:
G410 sensor
Starter motor
Camshaft sensor
Crankshaft sensor
Hpfp
Coolant temp sensor (only one that's next to vacuum pump, will replace the one under the intake manifold today)
Mods on the car:
Gtx3076r with 44mm external wastegate controlled by gfb3
Forge dv
Aem wideband
Rs4 injectors
APR hpfp
Walbro 525 controlled by pm4 (will be going back to stock today aswell to see if that's the problem)
Recently installed 165 fprv and 200 bar fuel sensor because car was running out of fuel with the rs4 fprv (done a few reflashes with the new setup, on the third this started happening)
Only code I have is "low fuel level"
My tuner thinks it's the pm4 acting up, contacted torqbyte they say it seems to be OK After I sent them a screenshot
Has anyone come across the same problem I'm currently facing and what fixed it for you. Really appreciate some support.
I own a 2006 mk5 gti that is modified. I've been having this issue lately of my car not starting after it has warmed up. I can drive around for as long as I want with no issues but as soon as I turn the engine off it won't start. The first attempt of trying to turn the car when it's hot it would turn on, idle for about 2 seconds and then stall and then all other attempts after that it will just crank without turning on. The only way it would start when its hot is when i remove the g410 sensor. PLEASE HELP!
Things I ve changed:
G410 sensor
Starter motor
Camshaft sensor
Crankshaft sensor
Hpfp
Coolant temp sensor (only one that's next to vacuum pump, will replace the one under the intake manifold today)
Mods on the car:
Gtx3076r with 44mm external wastegate controlled by gfb3
Forge dv
Aem wideband
Rs4 injectors
APR hpfp
Walbro 525 controlled by pm4 (will be going back to stock today aswell to see if that's the problem)
Recently installed 165 fprv and 200 bar fuel sensor because car was running out of fuel with the rs4 fprv (done a few reflashes with the new setup, on the third this started happening)
Only code I have is "low fuel level"
My tuner thinks it's the pm4 acting up, contacted torqbyte they say it seems to be OK After I sent them a screenshot
Has anyone come across the same problem I'm currently facing and what fixed it for you. Really appreciate some support.
Last edited: