GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Search results

  1. D

    Valve cover question

    Just bought a used replacement. I took my cover off some time ago but can't remember if this is normal or if it came to me broken.
  2. D

    F/s feeler

    Delete Delete
  3. D

    Just installed a Wintake...a little rant

    I wanted to post this because I have been dealing with various issues from running lean when I try to drive a bit spirited, boost pressure rapidly drops at higher rpms, and really bad turbo lag. It has gotten to the point where I was going to take the car to a shop and have them really dig in...
  4. D

    BLINKING CEL : Solved

    TL;DR : if you have an APR TUNE put in the anti theft code if you get a blinking CEL before calling for assistance. Save yourself 24hrs. I just wanted to post this in hopes of saving others from being stranded out in the middle of nowhere with a disabled vehicle and then spending a few hours...
  5. D

    Is this ok?

    I took this last time I changed my cam follower. Could anyone chime in if this looks normal or is that abnormal wear? I bought the car with 20k two years ago and the first time I changed the cf it was drilled all the way through. This picture is around 40k and the cf wasn't in to bad of shape...
  6. D

    Pioneer for sale

    SOLD
  7. D

    FS: Enfig Single Din

    Enfig RMK4-VW07 $30 shipped. Still in perfect condition. The center bar has been plasti dipped flat black. The black plastic didnt match at all. Other than that its basically brand new with no scratches.
  8. D

    Haven't seen this before

    Anyone know who makes this front end? Sent from my iPhone using Tapatalk 2
  9. D

    M11x R2

    http://www.ebay.com/itm/111043210009?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Selling my laptop. Trying to earn some extra cash for a wedding. Includes original box, windows 7 disc if you want to go back from windows 8, laptop sleeve, and external cd/dvd drive.No scratches or loose...
  10. D

    2007 Rabbit stock suspension

    Has about 75,000 on them. Still worked great, just need them gone after my new set up. $150, pick up Southern MD (20603). Will consider shipping if buyer pays for the cost.
  11. D

    Alignment question

    Got my alignment done after getting new wheels and tires. Went from stock wheels 16, to 18x8.5 ET 35 with 225/40/18 tires. The steering wheel still has some shack in it at higher speeds. I would like some feed back before I go back to the dealer.
  12. D

    FS: Premium 7 radio

    $100 shipped No cosmetic damage at all. PIN included. Moving out and need some extra cash!
  13. D

    FS: Premium 7 radio

    $100 shipped. PIN included. Out a 2008 GTI. Sorry no pics. Has no scratches or blemishes. I was going to use it my self but need the cash more.
  14. D

    Need some insight...

    So when I first got my car back in 06 I installed an aftermarket head unit. Well, I cut the factory harness because I was unaware of the electrical controls the car used. I have since re-wired with a connector I got from a salvage yard. I had to do the work around method to gain acc power to a...
  15. D

    No city lights?

    I have depo gti halogen replicas installed as well as a euro switch. I disabled the drl. Right now I have off, parking(side markers) on with interior lights, and on. All other switch positions are useless. I thought the city lights should come on when I have it set to parking. Any thoughts?
  16. D

    Teaser. Headlights

    Update: Headlight retrofit So this is what I ended up doing for those that commented when this was just a teaser. Hey everyone, Thought I would do a write up on my retrofit I just did. I hope you like and that this might help/inspire anyone out there looking for a great way to improve there...
  17. D

    GTI Replica (not halogen) Headlamps, HID kit 600k, 10-12pin adapter

    PLEASE HELP! NEED THESE GONE.Would make for a great HID retrofit! All three for $200 plus shipping $100 plus shipping ( - DEPO GTI replicas. These are oem replicas, not halogen ones. The passenger high beam assembly is loose. It doesn't stay in place but can be put back in place...if that...
Top