Perpetuus
Data Encryption
- Location
- In my garage
V
Official Canada FS/FT/WTB/WTT Thread #2
- Thread starter Gulfer
- Start date
Perpetuus
Data Encryption
- Location
- In my garage
Tyrolsport Brake Caliper Stiffening Kit + Stoptech Performance Pads
Selling my Tyrolsport brake caliper stiffening kit and Stoptech Performance front pads.
Both items are 100% new, unused, and in their original packaging. These pads have great reviews. No squealing and excellent stopping performance.
The Tyrolsport kit provides consistent, firm braking and prevents tapered wear of the front brake pads.
Price is $220 for everything. Selling only because I bought a BBK.
Selling my Tyrolsport brake caliper stiffening kit and Stoptech Performance front pads.
Both items are 100% new, unused, and in their original packaging. These pads have great reviews. No squealing and excellent stopping performance.
The Tyrolsport kit provides consistent, firm braking and prevents tapered wear of the front brake pads.
Price is $220 for everything. Selling only because I bought a BBK.
Aintxlovexgrand
Passed Driver's Ed
- Location
- Peterborough, Ontario, Canada
- Car(s)
- '07 GTI
FSI P-FLO Intake w/ Dry Filter
Traded my 07 GTI in for a 13 Golf R. Doesn't have the bung I need for the dv recirc in the Golf R so I'm selling it.
$200 shipped cus the box is fucking huge. Ill throw in some open fogs cus why not.
Pm'd
keisuke_z
No way as way...
- Location
- Vancouver, Canada
Hi folks,
I've got an APR downpipe for sale - was previously on my MkV GTI. Looking for $300obo
Any takers? GVRD only, sorry!
Cheers
Z
Sent from my HTC One_M8 using Tapatalk
I've got an APR downpipe for sale - was previously on my MkV GTI. Looking for $300obo
Any takers? GVRD only, sorry!
Cheers
Z
Sent from my HTC One_M8 using Tapatalk
nagagity
Passed Driver's Ed
- Location
- Markham, Ontario
hell no....AMG black series wheels and KW V3's already on car.....
babydubz
bagged life.
- Location
- The Great White North
- Car(s)
- 09 GTI (SOLD)
Gauging interest and perhaps a sale if the price is right.
Specs:
- 18x8.5/10 ET24 all around
- Custom refinish and rebarrel by VR Wheels in California. 17" face upsized to 18" wheel.
- 2.5" front and 3.5" polished step lips
- matte black finish
- polished BBS RS bolts
- new set of "W" center caps. Will include the original gold "VS" ones as well
Wheels have no curbage whatsoever and have been on the car for about 15,000km. Only ran during the summer. Some minor chipping of the powder coat on the wheels but barely noticeable.
Here's a few pictures of the wheels on the car last summer at Stancewars.
$2800 obo without tires. Can include tires for a bit more.
Specs:
- 18x8.5/10 ET24 all around
- Custom refinish and rebarrel by VR Wheels in California. 17" face upsized to 18" wheel.
- 2.5" front and 3.5" polished step lips
- matte black finish
- polished BBS RS bolts
- new set of "W" center caps. Will include the original gold "VS" ones as well
Wheels have no curbage whatsoever and have been on the car for about 15,000km. Only ran during the summer. Some minor chipping of the powder coat on the wheels but barely noticeable.
Here's a few pictures of the wheels on the car last summer at Stancewars.
$2800 obo without tires. Can include tires for a bit more.
DanZHP
Passed Driver's Ed
- Location
- Canada, Ontario, Hamilton
- Car(s)
- 2007 MK5 GTI
WTB OEM Ballast for GTI !
pm me!!
pm me!!
Rumble79
Ready to race!
- Location
- Toronto, Ontario
Koni FSD Damper Set for 2006-2014 VW Golf/GTI
For sale is a set of (4) Koni FSD Damper Set for 2006-2014 VW Golf/GTI.
*** SOLD ***
For sale is a set of (4) Koni FSD Damper Set for 2006-2014 VW Golf/GTI.
*** SOLD ***
Last edited:
CaptainPumpkin
Ready to race!
- Location
- YYZ
- Car(s)
- VW
FS: Fifteen52 Snowflakes 18x8.5 ET42
I'm buying new set of wheels this weekend so I am looking to sell my Snowflakes. They are the original 18" Fifteen52 Snowflakes with an ET42 offset and have black painted barrels.
Two of the wheels are in great shape after a couple years of use. One wheel has just a slight amount of curb rash and the last wheel does have some obvious curb rash it is definitely fixable.
They currently have Continental DWS tires mounted that have at least one season if not two until they are worn out.
-Looking for $1500 with tires or less if you are not interested in tires.
Feel free to PM or call/text me at 604 - 616 - 1003
Thanks!
I'm buying new set of wheels this weekend so I am looking to sell my Snowflakes. They are the original 18" Fifteen52 Snowflakes with an ET42 offset and have black painted barrels.
Two of the wheels are in great shape after a couple years of use. One wheel has just a slight amount of curb rash and the last wheel does have some obvious curb rash it is definitely fixable.
They currently have Continental DWS tires mounted that have at least one season if not two until they are worn out.
-Looking for $1500 with tires or less if you are not interested in tires.
Feel free to PM or call/text me at 604 - 616 - 1003
Thanks!
VancouverGTI
Go Kart Champion
- Location
- Vancouver
Brand new in box, VW OEM storage tray, only taken out to test fit, and is in mint condition. $100 or no offer. GVRD only; will not ship.
In original packaging:
The underside, to show the textured adhesive inserts (taped in place from factory) that go in the bottom of each segment to keep things from sliding around:
Outside of packaging:
In original packaging:
The underside, to show the textured adhesive inserts (taped in place from factory) that go in the bottom of each segment to keep things from sliding around:
Outside of packaging:
babydubz
bagged life.
- Location
- The Great White North
- Car(s)
- 09 GTI (SOLD)
Feeler, or an outright sale if I do get a buyer now:
- Airlift XL Slam front struts
- Bagyard Rear bags
- Bilstein Sport Shocks
- Full Accuair e-Level touchpad management (VU4, ECU, etc all included)
- Bonus, one extra sensor (one broke but the shop managed to still use the existing one so I have a spare lying around)
- Dual Viair 444C compressors
- Stinger relay kit
- 3/8" line
- 5ga Accuair aluminum (plasti-dipped black, so it can be removed)
- extra brand new fittings including two new SMC check valves. was going to try hardlines but never got around to it
- 2 SMC water traps
The bad:
The touchpad is a little scratched up and there's a few small gouges on the back shell of the controller. (I scratched it up trying to get it out of the fiberglass mold when making my custom controller mount) This is strictly cosmetic. The controller works perfectly.
The micro-USB end that plugs in to the touchpad is in rough shape but still works fine. I've used electrical tape to wrap up the wires at the very end to keep them safe. A new one can be had on the Bagriders site for $35
$2500 plus shipping OBO for the lot.
In addition, I have a Dakota Digital Odyssey series air pressure display gauge. It's the rectangle one with the brushed aluminum finish and blue illumination. Will include 5 x 150 PSI sensors as well.
$200 plus shipping OBO (I will cut a deal on this if purchased with entire system)
- Airlift XL Slam front struts
- Bagyard Rear bags
- Bilstein Sport Shocks
- Full Accuair e-Level touchpad management (VU4, ECU, etc all included)
- Bonus, one extra sensor (one broke but the shop managed to still use the existing one so I have a spare lying around)
- Dual Viair 444C compressors
- Stinger relay kit
- 3/8" line
- 5ga Accuair aluminum (plasti-dipped black, so it can be removed)
- extra brand new fittings including two new SMC check valves. was going to try hardlines but never got around to it
- 2 SMC water traps
The bad:
The touchpad is a little scratched up and there's a few small gouges on the back shell of the controller. (I scratched it up trying to get it out of the fiberglass mold when making my custom controller mount) This is strictly cosmetic. The controller works perfectly.
The micro-USB end that plugs in to the touchpad is in rough shape but still works fine. I've used electrical tape to wrap up the wires at the very end to keep them safe. A new one can be had on the Bagriders site for $35
$2500 plus shipping OBO for the lot.
In addition, I have a Dakota Digital Odyssey series air pressure display gauge. It's the rectangle one with the brushed aluminum finish and blue illumination. Will include 5 x 150 PSI sensors as well.
$200 plus shipping OBO (I will cut a deal on this if purchased with entire system)
babydubz
bagged life.
- Location
- The Great White North
- Car(s)
- 09 GTI (SOLD)
Bought these with the intention of running them but plans changed so listing them up for sale.
- 4 x OEM Mercedes S550 wheels
- 18x8.5 ET43
They are in good condition. There's some minor curb rash on some of them but nothing deep or over 1" long. Minor scratches on two of them as well. They still have the original tires on them (265/45/18 I think) but they're bald so they'll need to be swapped out. I bought brand new extended lugs and hub centric rings for them to fit in my MKV GTI (57.1mm) and will include those as well. The wheels also did not come with center-caps so I bought a set off Amazon, most likely replicas, but they do the job.
asking $850OBO
- 4 x OEM Mercedes S550 wheels
- 18x8.5 ET43
They are in good condition. There's some minor curb rash on some of them but nothing deep or over 1" long. Minor scratches on two of them as well. They still have the original tires on them (265/45/18 I think) but they're bald so they'll need to be swapped out. I bought brand new extended lugs and hub centric rings for them to fit in my MKV GTI (57.1mm) and will include those as well. The wheels also did not come with center-caps so I bought a set off Amazon, most likely replicas, but they do the job.
asking $850OBO
jstewartGTI
Passed Driver's Ed
- Location
- Aurora, Ontario
Forge catch can (FSI), rear stress bar and MMP battery box
Forge catch can for FSI w/boost tap - $200
Forget boost tap (an extra one) - $25
Eurosport rear stress bar - $60
MMP battery box - $40
Hawk HP+ brake pads, front & back. About 70% meat left - $100
Located just north of Toronto (in Aurora). Pick-up only. Just PM me.
Forge catch can for FSI w/boost tap - $200
Forget boost tap (an extra one) - $25
Eurosport rear stress bar - $60
MMP battery box - $40
Hawk HP+ brake pads, front & back. About 70% meat left - $100
Located just north of Toronto (in Aurora). Pick-up only. Just PM me.
Attachments
-
photo 2.JPG -
photo 3.JPG -
photo.JPG
Last edited:
Aintxlovexgrand
Passed Driver's Ed
- Location
- Peterborough, Ontario, Canada
- Car(s)
- '07 GTI
Last edited:
heavyboost
New member
- Location
- AB
Feeler
This is more of a feeler. Trying to sell my modded car, but may part out. This is just to gauge interest. From a 2008 VW GLI. Would have the following for sale:
All the engine build parts/clutch etc. have less than 10k on them.
Wheels probably have less than 5K. Intake/fuel pump etc. around 50K.
Long block, or small block:
Bored 83.5mm with forged Wossner pistons and IE connecting rods
Calico coated main and rod bearings
Arp main and head studs, arp rod bolts
Ported and polished head, ferrea exhaust valves with titanium retainers
Fluiddamper balancer, everything balanced
Could do a whole engine swap for stock (trade)
Clutchmaster stage 2+ clutch kit with single piece steel flywheel (stock-like feel)
034 street density engine, transmission mount
GT3071R turbo kit (exhaust manifold, downpipe, external wastegate),
intercooler pipe
Garrett front mount intercooler (atp kit with piping)
BSH intake
APR catback exhaust (RSC)
APR high pressure fuel pump (not rebuild)
RS4 injectors
Turbosmart eboost street controller
Podi air/fuel gauge with LC-1 controller (digital gauge, blue)
ECS Rear wheel spacers 10mm hubcentric,
stud conversion with closed end gunmetal locknuts
BBS 19x8.5 Gunmetal CK wheels with almost brand new hankook performance tires
Forge catch can kit (brand new, never installed)
There may be more. This is just off the top of my head. Im located in the calgary area.
Please email or PM. Thanks.
commonrail AT gmail.com
This is more of a feeler. Trying to sell my modded car, but may part out. This is just to gauge interest. From a 2008 VW GLI. Would have the following for sale:
All the engine build parts/clutch etc. have less than 10k on them.
Wheels probably have less than 5K. Intake/fuel pump etc. around 50K.
Long block, or small block:
Bored 83.5mm with forged Wossner pistons and IE connecting rods
Calico coated main and rod bearings
Arp main and head studs, arp rod bolts
Ported and polished head, ferrea exhaust valves with titanium retainers
Fluiddamper balancer, everything balanced
Could do a whole engine swap for stock (trade)
Clutchmaster stage 2+ clutch kit with single piece steel flywheel (stock-like feel)
034 street density engine, transmission mount
GT3071R turbo kit (exhaust manifold, downpipe, external wastegate),
intercooler pipe
Garrett front mount intercooler (atp kit with piping)
BSH intake
APR catback exhaust (RSC)
APR high pressure fuel pump (not rebuild)
RS4 injectors
Turbosmart eboost street controller
Podi air/fuel gauge with LC-1 controller (digital gauge, blue)
ECS Rear wheel spacers 10mm hubcentric,
stud conversion with closed end gunmetal locknuts
BBS 19x8.5 Gunmetal CK wheels with almost brand new hankook performance tires
Forge catch can kit (brand new, never installed)
There may be more. This is just off the top of my head. Im located in the calgary area.
Please email or PM. Thanks.
commonrail AT gmail.com